@nikscha I was hoping that this is not true and there is a way to change the parameters

Hello guys, Is it possible for each driver to set its own parameter T in the M569 command? Or will only the larger value of the T parameter be used for all drivers?

Board: fly_F407ZG (stm32f4-wifi)
Firmware: RepRapFirmware for STM32F4 based Boards 3.4.6_101
Duet WiFi Server Version: 1.25-01S-D
Duet Web Control 3.4.6

It's sad that there are so few pin for PWM on the FLY board

@gloomyandy Thank you very much!
Now it is clear why the signals were so strange

@gloomyandy , I got such a PWM from the PA_0 pin, only it looks a little different from what I imagined

Hello guys, I have a question: is it possible to set a PWM signal, for example, with a duration of 10 ms and pauses of 34 ms, to some output from the board?

Board: fly_F407ZG (stm32f4-wifi)
Firmware: RepRapFirmware for STM32F4 based Boards 3.4.6_101 (2023-08-01)
Duet WiFi Server Version: 1.25-01S-D
Duet Web Control 3.4.6