I made myself a CNC and bought a stepper motor on steppermotor. After about 1 hour of using my engine
It was so hot I couldn't bear to put my hand on the engine.
What should I do to prevent the engine from overheating?
If anyone has encountered this problem, I would like to hear their opinion.
We are waiting for an answer.
Latest posts made by Sullivan
-
What should I do to prevent the engine from overheating?
-
3D printed clock, Stepper motor
Hello everyone,
I am making a 3D printed table clock.
This will be set in motion by a stepper motor(Nema14), an arduino and a driver (A4988).https://www.steppermotor.frI will then provide you with images of the clock and the finished project, the STEP files for those who wish to 3D print this project.
So I need precise rotation of the stepper motor.
But I can't get my stepper motor to rotate.I followed different tutorials including this one: A4988, a breakout to control stepper motors... even in microstepping - MCHobby - Le Blog 12
Using arduino micro, Nema 14 motor, an A4988 driver. The engine seems stuck and does not turn.Any ideas, recommendations, etc.?
Thanks in advance.
-
Difference between Nema23 and Nema24 stepper motors?
Hello, everyone.
Recently I've been building my own 3D printer I'm looking to buy stepper motors on the https://www.steppermotor.fr website, there are currently two preferred models, the Nema23 stepper motor has a form factor of 57mm × 57mm and the Nema24 stepper motor has a form factor of 60mm × 60mm. as you can see, the Nema24 stepper motor is slightly larger compared to the Nema23 stepper motor. Nema24 stepper motor is slightly larger than Nema23 stepper motor.
But other than that, what is the difference between them? Which one should I buy?