@mrehorstdmd I appreciate your help and I'm sorry for what will be a very anticlimatic conclusion.

The board wasn't lying when it reported a bad password, because it was a bad password - I had misremembered a single character in it. One of those days I guess.

But for anyone in the future who may find this post I can confirm that;

• Capitals, lowercase and spaces in the SSID work, apostrophes will also probably work if you escape them
• Same goes for the passwords, and it can take 25 character length

I'm sorry for wasting everyones time.

Hello,

I have recently changed my access point and am no longer able to get the Duet 2 to connect to the network.

WiFi reported error: Wrong password while trying to connect to Fake SSID

I have performed;

M552 S0
M588 S"*"
M587 S"F'A'K'E SSID" P"M'E'M'P'H'''S'F'A'K'E'P'A'S'S'W'O'R'D"
M552 S1

• I am currently on FW 2.05.1.
• I am using YAT to communicate on the COM port.
• I have managed to get the board on the network with a similar SSID & password combination before.
• I have disabled 5GHz on the AP, although this makes no change.
• My password has lowercase and a aphostrophe in it. I have escaped these characters in M587
  • Later on I removed the aphostrophe from the password - no change
• I can confirm the Duet can connect to an open network.
• I have put a dummy SSID in slot one as it was mentioned that the flash on the WiFi wears if written to too many times. I don't beleve this is an issue for me as M587 has never been in my config.g but worth mentioning. - no change
• I have applied M587 through a macro to get around password input - no change

I would post my M122 here but it gets flagged as spam.

Any advice will be very much appreciated, I'm a bit at a loss what to do here on out.

~ Memph

@mrehorstdmd I appreciate your help and I'm sorry for what will be a very anticlimatic conclusion.

The board wasn't lying when it reported a bad password, because it was a bad password - I had misremembered a single character in it. One of those days I guess.

But for anyone in the future who may find this post I can confirm that;

• Capitals, lowercase and spaces in the SSID work, apostrophes will also probably work if you escape them
• Same goes for the passwords, and it can take 25 character length

I'm sorry for wasting everyones time.

@jay_s_uk Yeah, I've tried every combination.

P"M'E'M'P'H'''S'F'A'K'E'P'A'S'S'W'O'R'D"
P"Memph''sfakepassword"
P"Memph'sfakepassword"

Doesn't change anything, which is why I tried using macros to try to avoid the problem altogether.

Hello,

I have recently changed my access point and am no longer able to get the Duet 2 to connect to the network.

WiFi reported error: Wrong password while trying to connect to Fake SSID

I have performed;

M552 S0
M588 S"*"
M587 S"F'A'K'E SSID" P"M'E'M'P'H'''S'F'A'K'E'P'A'S'S'W'O'R'D"
M552 S1

• I am currently on FW 2.05.1.
• I am using YAT to communicate on the COM port.
• I have managed to get the board on the network with a similar SSID & password combination before.
• I have disabled 5GHz on the AP, although this makes no change.
• My password has lowercase and a aphostrophe in it. I have escaped these characters in M587
  • Later on I removed the aphostrophe from the password - no change
• I can confirm the Duet can connect to an open network.
• I have put a dummy SSID in slot one as it was mentioned that the flash on the WiFi wears if written to too many times. I don't beleve this is an issue for me as M587 has never been in my config.g but worth mentioning. - no change
• I have applied M587 through a macro to get around password input - no change

I would post my M122 here but it gets flagged as spam.

Any advice will be very much appreciated, I'm a bit at a loss what to do here on out.

~ Memph