@dc42
I tried to make an opposite action but without success
examle:
M42 P4 S{1.0 / iterations}
G4 P40
I would like to make it loop.
I checked the gcode metadata commands ,but there is information for more advanced users than me.
@dc42
I tried to make an opposite action but without success
examle:
M42 P4 S{1.0 / iterations}
G4 P40
I would like to make it loop.
I checked the gcode metadata commands ,but there is information for more advanced users than me.
@dc42 said in Gcode for printer light fadeing:
while iterations <= 50 M42 P4 S{0.02 * iterations} G4 P40
Thanx a lot @dc42
It is work!
Thank you again for your job!
Now my gcode is :;Light fadeing.g
M42 P4 S0.1
G4 P200
M42 P4 S0.2
G4 P200
M42 P4 S0.3
G4 P200
M42 P4 S0.4
G4 P200
M42 P4 S0.5
G4 P200
M42 P4 S0.6
G4 P200
M42 P4 S0.7
G4 P200
M42 P4 S0.8
G4 P200
M42 P4 S0.9
G4 P200
M42 P4 S1.0
G4 P200
M42 P4 S0.9
G4 P200
M42 P4 S0.8
G4 P200
M42 P4 S0.7
G4 P200
M42 P4 S0.6
G4 P200
M42 P4 S0.5
G4 P200
M42 P4 S0.4
G4 P200
M42 P4 S0.3
G4 P200
M42 P4 S0.2
G4 P200
M42 P4 S0.1
G4 P200
But light change is stepping end gcode looks ugly)
Hello everyone!
I'm in love with rrf(duet) customization possibility.
I would like make some macros to pulse or fade in-out led light of my printer .
In my opinion it is good aesthetic status highlighter in case end of printing ,pause ..etc
But I don't have enough skill in gcode to realize it by myself .
I would be grateful for any help or information on the topic!