Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Radds + arduino due

    Scheduled Pinned Locked Moved
    Other control boards
    radds
    5
    19
    2.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • weed2allundefined
      weed2all
      last edited by weed2all

      Hi! What is the state of reprap firmware on radds+arduino due? I have this board along with some original tmc2208 and I want to give a try!how to install it and where to get the firmware for radds?
      thank you!

      https://www.thingiverse.com/weed2all/designs

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        The latest stable release (2.03) includes a build for Due/RADDS, but I haven't tested it, and I am not aware that anyone else has. For first time installation you will need to install it via the USB programming port of the Due using Bossa or bossac.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • weed2allundefined
          weed2all
          last edited by

          Hi dc42, is there any tutorial or something that a noob can follow to install the 2.03 firmware on radds!I mean, i have 2 duet 2 wifi boards working already, but never installed the firmware on other boards, so the bossa is new for me...I'll slowly want to port all my 7 3dprinters from marlin to reprap...finally i will get a duet for each printer, but as I have this board laying around i want to test it and maybe I will keep it for future tests on my test printer...

          https://www.thingiverse.com/weed2all/designs

          1 Reply Last reply Reply Quote 0
          • weed2allundefined
            weed2all
            last edited by

            And by the way...thank you for your fast replay...never had such a great experience with other firmware...

            https://www.thingiverse.com/weed2all/designs

            1 Reply Last reply Reply Quote 0
            • A Former User?
              A Former User
              last edited by

              This might get you 99% of the way despite being for the Duet boards, just pick the correct filename for the Arduino Due
              https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Fallback_procedure_Num_3

              1 Reply Last reply Reply Quote 0
              • weed2allundefined
                weed2all
                last edited by

                Ok...i Just get my reprap firmware on my radds! Now to change parameter how to do it!i connect my radds board to my windows 10 pc thru YAT or pronterface?do I need to take out my sd cards from radds board and mount it to pc in order to get my config files done?or I can make all the things from terminal something like duet from web interface?

                https://www.thingiverse.com/weed2all/designs

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  https://configurator.reprapfirmware.org/Start

                  You can use the configurator to create a config set. Then once you're connected to the web interface you can edit everything from there.

                  Z-Bot CoreXY Build | Thingiverse Profile

                  1 Reply Last reply Reply Quote 0
                  • weed2allundefined
                    weed2all
                    last edited by

                    Web interface?does radds support wifi?I have a bunch of esp8266 around!

                    https://www.thingiverse.com/weed2all/designs

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator
                      last edited by

                      No idea. You're in uncharted territory now.

                      Z-Bot CoreXY Build | Thingiverse Profile

                      1 Reply Last reply Reply Quote 0
                      • weed2allundefined
                        weed2all
                        last edited by

                        And how about panel due for radds?on my dedicated duet2 wifi printers I don't use any lcd...i only use the web interface, but since radds is not a duet if I can't have the web interface, I might try the panel due lcd on it...I don't want to be pc dependent...any tutorial for installing panel due?what hardware do I need more beside the panel due of course?

                        https://www.thingiverse.com/weed2all/designs

                        dc42undefined 1 Reply Last reply Reply Quote 0
                        • A Former User?
                          A Former User
                          last edited by A Former User

                          If the cpu has a uart and it configured in the firmware build then you shouldn't need any hardware, just hook up 5v, gnd, rx, tx and enable panel support it in config.g.

                          But like wifi, no idea if the radds build has panel due support enabled, you'd have to try or browse the source.

                          weed2allundefined 1 Reply Last reply Reply Quote 0
                          • weed2allundefined
                            weed2all @A Former User
                            last edited by

                            @bearer it has uart!how to add it to config.g file in order to activate it..

                            https://www.thingiverse.com/weed2all/designs

                            1 Reply Last reply Reply Quote 0
                            • A Former User?
                              A Former User
                              last edited by

                              how about looking for paneldue in the g-code wiki?
                              https://duet3d.dozuki.com/Wiki/Gcode#Section_M575_Set_serial_comms_parameters

                              you may still find it wont work without the firmware build supporting it, you're still in uncharted waters, beware the kraken etc.

                              1 Reply Last reply Reply Quote 0
                              • dc42undefined
                                dc42 administrators @weed2all
                                last edited by

                                @weed2all said in Radds + arduino due:

                                And how about panel due for radds?on my dedicated duet2 wifi printers I don't use any lcd...i only use the web interface, but since radds is not a duet if I can't have the web interface, I might try the panel due lcd on it...I don't want to be pc dependent...any tutorial for installing panel due?what hardware do I need more beside the panel due of course?

                                The RADDS board certainly used to support PanelDue, and AFAIK it still does.

                                Duet WiFi hardware designer and firmware engineer
                                Please do not ask me for Duet support via PM or email, use the forum
                                http://www.escher3d.com, https://miscsolutions.wordpress.com

                                1 Reply Last reply Reply Quote 0
                                • weed2allundefined
                                  weed2all
                                  last edited by

                                  Ok...so I got the paneldue 5i in my shopping cart!now another question(I know I'm boring with all the question)
                                  tmc2208 uart is supported by the reprap firmware on radds?

                                  https://www.thingiverse.com/weed2all/designs

                                  dc42undefined 1 Reply Last reply Reply Quote 0
                                  • dc42undefined
                                    dc42 administrators @weed2all
                                    last edited by

                                    @weed2all said in Radds + arduino due:

                                    Ok...so I got the paneldue 5i in my shopping cart!now another question(I know I'm boring with all the question)
                                    tmc2208 uart is supported by the reprap firmware on radds?

                                    No. In principle you could add it, if you can identify a free pair of UART or USART Tx and RX pins, because there is a TMC2208/2224 driver in RRF that is used in the Duet Maestro firmware build. You would need to add the multiplexer chip to the hardware to allow several TMC2208 chips to be fed by one UART. The SAM3X chip doesn't have the Peripheral DMA Controllers built in to the UARTs that the SAM4 does, so you would also need to adapt the code to use the regular DMAC instead of the PDC.

                                    Duet WiFi hardware designer and firmware engineer
                                    Please do not ask me for Duet support via PM or email, use the forum
                                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                                    1 Reply Last reply Reply Quote 0
                                    • weed2allundefined
                                      weed2all
                                      last edited by

                                      Wow...thanks for reply...so is a headake...better let it be...thank you...

                                      https://www.thingiverse.com/weed2all/designs

                                      1 Reply Last reply Reply Quote 0
                                      • weed2allundefined
                                        weed2all
                                        last edited by

                                        Does bltouch work with reprap firmware under radds board?

                                        https://www.thingiverse.com/weed2all/designs

                                        1 Reply Last reply Reply Quote 0
                                        • MrsDelishundefined
                                          MrsDelish
                                          last edited by

                                          PanelDUE works fine on a RADDS board, iirc the pins in the connector had to be rearranged to match the top 4 pins in AUX1. I had to solder pins to AUX1 as well.
                                          Firmware 2.03 works fine so far 🙂

                                          Send: M115
                                          Recv: FIRMWARE_NAME: RepRapFirmware for RADDS FIRMWARE_VERSION: 2.03 ELECTRONICS: RADDS 1.5 FIRMWARE_DATE: 2019-06-13b2
                                          

                                          There is a lot of sdcard juggling between the printer and pc when setting it up.

                                          1 Reply Last reply Reply Quote 0
                                          • First post
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA