Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    External Mosfet

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    1
    2
    244
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • ahoward7652undefined
      ahoward7652
      last edited by

      I have a IFR520 mosfet (n-channel)that I am trying to control with expansion connector Pin 13 (heater 4). on my Duet Wifi I have already disabled it with M307 H4 A-1 C-1 D-1. When I connect the mosfet and power up the Duet Wift the mosfet with a fan connected with no command issued comes on. When I set the I1 param in the M42 command, nothing changes. I can use M42 P4 S255 to turn the fan off. I get the same thing with every other heater pin I try. I assume I am missing something. I thought I had read something that the I1 no longer works with M42? I thought that the heater pins should be active low by default.

      ahoward7652undefined 1 Reply Last reply Reply Quote 0
      • ahoward7652undefined
        ahoward7652 @ahoward7652
        last edited by

        @ahoward7652 Firmware Version is 2.04

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA