Steppers close to Duet board

[bartolomeus]

Is it ok to have the stepper motors right beside the Duet board, or will I run into some kind of interference?

[Veti]

the pt100 sensor is prone to interference. so keep those wires away from any other wires.

[dc42]

Placing stepper motors close to the Duet shouldn't cause any problem.

[bartolomeus]

Thanks! Now I feel safe to shorten the stepper motor wiring.

[droftarts]

The Fisher delta I have is pretty much the same with no problems, though it uses a thermistor rather than PT100:

Ian