• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Cant Get Board Setup PLEase HELPPP!!!

Scheduled Pinned Locked Moved
Duet Web Control
5
28
975
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    Brandon019349
    last edited by 27 Aug 2019, 16:14

    and also where do i go from here to get everything started up?

    1 Reply Last reply Reply Quote 0
    • undefined
      Brandon019349
      last edited by 27 Aug 2019, 16:23

      I got the web controller up but now it wont home Z

      1 Reply Last reply Reply Quote 0
      • undefined
        Brandon019349
        last edited by 27 Aug 2019, 16:27

        Its like it doesnt know the bed is there and i dont know how to make it use the bltouch instead of the head

        1 Reply Last reply Reply Quote 0
        • undefined
          Veti
          last edited by 27 Aug 2019, 16:37

          why dont you start by telling us what printer you have. what its currently running.

          there are step by step guides on how to set up a duet.
          for example here is one for the ender 3
          https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+1:+Wiring/37

          1 Reply Last reply Reply Quote 0
          • undefined
            Brandon019349
            last edited by 27 Aug 2019, 16:43

            I have an ender 3 but the guy that i got it from added lots of stuff like the bl touch

            1 Reply Last reply Reply Quote 0
            • undefined
              Brandon019349
              last edited by 27 Aug 2019, 16:45

              There isnt really a guide for Ender 3 with bl touch Duet 2 Maestro and micro swiss hotend.

              undefined 1 Reply Last reply 27 Aug 2019, 16:55 Reply Quote 0
              • undefined
                Veti @Brandon019349
                last edited by 27 Aug 2019, 16:55

                @brandon019349
                ender 3 and ender 3 pro are close enough.

                then you go on to set up the bltouch using this helpful page
                https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe

                and the micro swiss hotend might just be a different thermistor.

                1 Reply Last reply Reply Quote 0
                • undefined
                  Brandon019349
                  last edited by 27 Aug 2019, 16:59

                  @veti said in Cant Get Board Setup PLEase HELPPP!!!:

                  https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe

                  This is the issue Im having. I dont understand any of this stuff so i don't understand half the stuff they are saying to set it up. Thats why i need help

                  1 Reply Last reply Reply Quote 0
                  • undefined
                    PaulHew
                    last edited by 27 Aug 2019, 17:01

                    As @Veti has said start with the manuals that Phaedrux has written, they are a godsend.
                    I can give you my config for the BL Touch.
                    As it says the Microswiss is a hot end, it only heats.
                    Just need to know which thermistor is in it.

                    I can drop my Maestro code before I put the DD Extruder on it, but not until later.

                    P.

                    RailCore II - Duet Mini + 1LC, Voron V0.1 - Duet Mini
                    Voron 2.4 disassembled..... Waiting for the RailCore Mini....

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      Brandon019349
                      last edited by 27 Aug 2019, 17:06

                      I have gotten to the web controller and have read all manuals I can find and still don't understand how to get this to work. I feel stupid that I don't understand this stuff but I dont and need more guidance than words on a manual that doesnt go into depth at all

                      1 Reply Last reply Reply Quote 0
                      • undefined
                        Veti
                        last edited by 27 Aug 2019, 17:06

                        Brandon. 3d printing is not something that just works. you will need to invest a lot of time in it.
                        there are many people start of like you. there are a lot of guides written and made on youtube.

                        so please invest the time. read the guide. then come back with a list of things that you do not understand and ask them here.
                        we will try and help you understand them. but a general "i dont understand half of it" is not helpful because we dont know which half you dont understand.

                        setting up a printer is just a start. you will need to test out a lot of different settings to get a good print quality. this takes time and involves reading and learning every step of the way.

                        ? 1 Reply Last reply 27 Aug 2019, 18:07 Reply Quote 1
                        • ?
                          A Former User @Veti
                          last edited by 27 Aug 2019, 18:07

                          @veti said in Cant Get Board Setup PLEase HELPPP!!!:

                          Brandon. 3d printing is not something that just works. you will need to invest a lot of time in it.
                          there are many people start of like you. there are a lot of guides written and made on youtube.

                          so please invest the time. read the guide. then come back with a list of things that you do not understand and ask them here.
                          we will try and help you understand them. but a general "i dont understand half of it" is not helpful because we dont know which half you dont understand.

                          setting up a printer is just a start. you will need to test out a lot of different settings to get a good print quality. this takes time and involves reading and learning every step of the way.

                          +1 on this

                          1 Reply Last reply Reply Quote 0
                          • undefined
                            PaulHew
                            last edited by 27 Aug 2019, 18:09

                            Where are you based?
                            Is your config.g as you posted earlier?
                            Also a please post your config-overide, again if it is as above then fine.

                            I will go through and make sure the base settings are OK, to help.

                            RailCore II - Duet Mini + 1LC, Voron V0.1 - Duet Mini
                            Voron 2.4 disassembled..... Waiting for the RailCore Mini....

                            1 Reply Last reply Reply Quote 0
                            • undefined
                              Brandon019349
                              last edited by 27 Aug 2019, 21:10

                              Ok I think I have everything else set up the only thing that I need to figure out is why my extruder doesn't go to the center of the bed to home the Z axis. I dont think i have any configuration files for the bl touch either. I'm not sure how to get those because everything that I have seen has been for different machines and not with a maestro.

                              1 Reply Last reply Reply Quote 0
                              • undefined
                                PaulHew
                                last edited by 28 Aug 2019, 04:53

                                This bit goes in your config.g

                                Mine is before the Endstops section
                                ;BLTOUCH CONFIG; Z-Probe
                                M574 Z1 S2 ; Set endstops controlled by probe
                                ;M558 P9 H5 F120 T6000 ; Set Z probe type to bltouch and the dive height + speeds
                                M558 P9 H5 F120 T6000 A10 R0.75 S0.02
                                ;G31 P500 X40 Y-13 Z0.340 ; Set Z probe trigger value, offset and trigger height
                                G31 P25 X40 Y-13 Z0.853 ;453 ;940 ;744 ;817 ;981 ;0.842 ;1.265 ;1.286 ;403 ;377
                                M557 X40:220 Y15:220 S20 ; Define mesh grid

                                This is in my bed.g
                                M561 ; clear any bed transform
                                G29 ; probe the bed and enable compensation

                                deployprobe.g
                                M280 P64 S10

                                homeall.g
                                ; homeall.g
                                ; called to home all axes
                                ;
                                ; generated by RepRapFirmware Configuration Tool v2 on Mon Apr 08 2019 10:31:02 GMT+0100 (British Summer Time)
                                G91 ; relative positioning
                                G1 Z5 F6000 S2 ; lift Z relative to current position
                                ;M98 Pdeployprobe.g ; deploy mechanical Z probe
                                G1 S1 X-240 Y-240 F1800 ; move quickly to X and Y axis endstops and stop there (first pass)
                                G1 X5 Y5 F6000 ; go back a few mm
                                G1 S1 X-240 Y-240 F360 ; move slowly to X and Y axis endstops once more (second pass)
                                G90 ; absolute positioning
                                G1 X122 Y122 F6000 ; go to first bed probe point and home Z
                                G30 ; home Z by probing the bed

                                homex.g
                                G91 ; relative positioning
                                G1 Z5 F6000 S2 ; lift Z relative to current position
                                G1 S1 X-240 F1800 ; move quickly to X axis endstop and stop there (first pass)
                                G1 X5 F6000 ; go back a few mm
                                G1 S1 X-240 F360 ; move slowly to X axis endstop once more (second pass)
                                G1 Z-5 F6000 S2 ; lower Z again
                                G90 ; absolute positioning

                                homey.g
                                G91 ; relative positioning
                                G1 Z5 F6000 S2 ; lift Z relative to current position
                                G1 S1 Y-240 F1800 ; move quickly to Y axis endstop and stop there (first pass)
                                G1 Y5 F6000 ; go back a few mm
                                G1 S1 Y-240 F360 ; move slowly to Y axis endstop once more (second pass)
                                G1 Z-5 F6000 S2 ; lower Z again
                                G90 ; absolute positioning

                                homez.g
                                G91 ; relative positioning
                                G1 Z5 F6000 S2 ; lift Z relative to current position
                                G90 ; absolute positioning
                                G1 X122 Y122 F6000 ; go to first probe point
                                G30 ; home Z by probing the bed

                                retractprobe.g
                                M280 P64 S90

                                That is about it for setting up the BL Touch.
                                Please make sure it is wired correctly as per this.
                                https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe#Section_BLTouch

                                My printer was an ender 3 Pro. You will need to measure the offset for the probe.

                                HTH Paul.

                                RailCore II - Duet Mini + 1LC, Voron V0.1 - Duet Mini
                                Voron 2.4 disassembled..... Waiting for the RailCore Mini....

                                1 Reply Last reply Reply Quote 0
                                23 out of 28
                                • First post
                                  23/28
                                  Last post
                                Unless otherwise noted, all forum content is licensed under CC-BY-SA