Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    PART COOLING FANS

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    2
    213
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • swrightlastundefined
      swrightlast
      last edited by swrightlast

      I have 2 blower type fans running on my part cooler. Should I make separate wire runs to the board, or can I gang them together and run one 2-wire lead to the board?

      1 Reply Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt
        last edited by

        I have to 40x20 blowers "ganged" together - they don't draw that much current.

        As long as the total current draw doesn't exceed the Duet rating and the voltage drop over the wires connecting the fans to the Duet is acceptable all should work fine.

        Frederick

        Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA