Buttons to raise / lower the temperature
-
Hi,
this is a proposal for DWC. Like there is a control to raise and lower the printhead, the microstepping control in real time, that there is something similar for temperature.
Next to the Nozzle temperature selector, there was a button to raise and another to lower the temperature, in small increments (1º, 2º, configurable)....
I think it would be useful for several things, I can think of:- Adjust the temperature to a new filament in real time ... you could raise and lower the temperature for a new filament, until you find the right one.
- If you want to increase, or reduce, the printing speed. You could adjust the temperature.
- If as in my case, this has occurred to me, I want to adjust the temperature sensor, M305.
I think it would be useful for many things, which right now you have to do by adding the temperature to the DWC list or by console .....
