Disable Smart Effector's LED lights
-
Is there any way to disable them in firmware?
Currently I stuck small pieces of tape to them, but maybe there's more elegant way -
Downward facing? not in firmware, they are wired in parallel to the heater fan.
You can tape, paint, remove, cut traces, etc.
-
Yes downward ones, they interfere with my camera. Will keep taped then.
-
They can't be disabled in firmware because they are connected in parallel with the heatsink fan. You could run separate wires to the heatsink fan instead of using the 2 pins in the 6-pin connector. Or you could cut one of the traces that connects the LEDs, but of course that will void the warranty.
