beg.g compaining please help

[dmkmedia]

im trying to set my bed.g file and it keeps saying points 0 to 3 must be clcokwise and the p4 should be near centre but they are

M561 ; clear any bed transform
; Probe the bed at 4 points
G30 P0 X0 Y35 H0 Z-99999
G30 P1 X195 Y35 H0 Z-99999
G30 P2 X195 Y220 H0 Z-99999
G30 P3 X0 Y220 H0 Z-99999
G30 P4 X80 Y120 H0 Z-99999 S

G29
M374
M375

my sensor is off to the right and forward a little so i have to use these values to scan the max area pos

[Danal]

The path through the points you defined, in order, is counterclockwise.