DWC2 and RRF2: password issue

fma · 8 Dec 2019, 15:57

Hi!

I'm using RRF3 and DWC2, and every time I send a file from Slic3rPE, DWC prints an error message, saying that my password is wrong, and asks me to enter it again...

Does anyone else have this issue?

Thanks,

dc42 · 9 Dec 2019, 14:11

@fma said in DWC2 and RRF2: password issue:

Hi!

I'm using RRF3 and DWC2, and every time I send a file from Slic3rPE, DWC prints an error message, saying that my password is wrong, and asks me to enter it again...

Does anyone else have this issue?

Thanks,

I presume you are using the plugin for Slic3r to send the file to the Duet via http. Does that plugin have provision for setting the password to be used when connecting to the Duet?

fma · 9 Dec 2019, 14:31

Yes, once configured, it does not ask anything, and upload the file correctly. It seems that DWC deconnexion occures when the file is saved on the CF, not during the transfert.

I will check, but I think I have the same issue with PrusaSlicer...

Stealthy_TT · 12 Dec 2019, 07:36

not the same issue but somewhat the same. When logging back in after my computer sleeps I also get an error with incorrect password. I have to refresh the page and then it takes the password.

fma · 12 Dec 2019, 07:49

You mean, without re-entering it? I didn't try that...

Stealthy_TT · 12 Dec 2019, 09:16

@fma My mistake worded that wrong. if my machine sleeps it logs me out of DWC when I go to re login I am prompted with "incorrect password". I have to reload DWC first before it would accept my password. Password is autofilled so I know im not typing it wrong.

dc42 · 12 Dec 2019, 10:38

@Stealthy_TT said in DWC2 and RRF2: password issue:

@fma My mistake worded that wrong. if my machine sleeps it logs me out of DWC when I go to re login I am prompted with "incorrect password". I have to reload DWC first before it would accept my password. Password is autofilled so I know im not typing it wrong.

Which browser and operating system are you using? It sounds as though the browser isn't remembering the password you enter while it is asleep. Maybe it is just reloading the entire page when it wakes up.

Stealthy_TT · 13 Dec 2019, 06:32

@dc42 said in DWC2 and RRF2: password issue:

@Stealthy_TT said in DWC2 and RRF2: password issue:

@fma My mistake worded that wrong. if my machine sleeps it logs me out of DWC when I go to re login I am prompted with "incorrect password". I have to reload DWC first before it would accept my password. Password is autofilled so I know im not typing it wrong.

Which browser and operating system are you using? It sounds as though the browser isn't remembering thew password you enter while it is asleep. Maybe it is just reloading the entire page when it wakes up.

Firefox & Chrome on Windows 10, and Android tablet with Chrome. All exhibit the same thing. I payed close attention to it today, So when I wake my machine up/ or Tablet there is already the error "Failed to maintain connection to 192.168.1.25 Incorrect Password".

If I then enter the password (autofilled) it will pop up with "connecting" after a little it will give an error window Failed to connect to 192.168.1.25 Network Error"

Since there is no longer a connect button I have to just refresh the page, then enter password and it lets me in like normal, but have to repeat that process each time.

clytle374 · 15 Dec 2019, 10:39

I can confirm this is happening with latest stable firmware/web control
Cory