Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    How to remove Sensor not ready error

    Scheduled Pinned Locked Moved Unsolved
    Tuning and tweaking
    1
    1
    80
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Killernoyundefined
      Killernoy
      last edited by

      I want setup a Dummy heater so I Put this in to Config.g:

      M308 S5 P"duex.e4temp" Y"thermistor" T100000 B4138 	; configure sensor 5 as thermistor on pin duex.e4temp
M950 H5 C"e6heat" T5 					; create Dummy heater and map it to sensor 4

      I Tested Sensor 5 using M308 S5 and got this

      M308 S5
Sensor 5 type Thermistor using pin (e4temp,duex.e4temp,exp.thermistor5,exp.37), reading 40.5, last error: sensor not ready, T:100000.0 B:4138.0 C:0.00e+0 R:4700.0 L:0 H:0

      Now I want to know how I remove This Error

      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Unless otherwise noted, all forum content is licensed under CC-BY-SA