Duet3 6HC Config?

tech · 24 Mar 2020, 15:19

Hi,

I am looking for a basic code to start the configuration with the Duet3 6HC.
Someone could help me?
Thank you

A Former User · 24 Mar 2020, 15:22

did you try https://configtool.reprapfirmware.org/General - choose Duet 3 and fill in the blanks?

tech · 24 Mar 2020, 19:02

How do I configure three heaters to display in web control?

Thanks

Chris

A Former User · 24 Mar 2020, 19:29

tech · 24 Mar 2020, 19:57

Ok, I made the changes from configtool but I still don't have the sensor displayed?

brendon · 2 Apr 2020, 11:39

Check out my config.g for my ToolChanger. It is important to note that I am using CAN toolboards, but if you adjust the extruder drive mapping, heater output, and thermistor inputs it might be helpful:

https://github.com/bdtower8/Duet3ToolboardToolChanger/blob/master/sys/config.g

Line numbers that would need to be changed:

40, 61, 62, 66, 67, 71, 72, 76, 77, 83, 86, 89, 92