Duet3D Mainboard 6HC + Hotend+Heatbed
-
I'm trying to build my printer from scratch using a Duet3D 6HC Mainboard, I'm struggling to figure out where to connect the hotend and the heater bed, the 6-way barrier strip has two power supply inputs and the OUT_0 is meant to power a heated bed, so... where the hotend go?
-
@Reaperrhs said in Duet3D Mainboard 6HC + Hotend+Heatbed:
where the hotend go?
out_1, out_2 or out_3 ?
-
@bearer sorry, I'm confused, 6-way barrier strip has 3 pairs of pins, the first two are 12-32 and 12-36 INPUTS and the last one according to DUET is meant to power a heated bed, so, my question is how I power a hotend nozzle? they are no more outputs left
-
Bed goes to out0 which is, as you point out, gets its power 'in' on the center two terminal strip screws, and puts that power out on the 'rightmost' of that terminal strip.
Bearer is suggesting out1, or out2, or out3. These are very good for driving a hotend heater. They have the current capability, and heavy duty pins, etc, etc.
-
@Danal i understand now, i appreciated, thanks to both
