Smart Effector remaining triggered
-
Hello,
I have Rostock Vmax 2 with a smart effector. I have been printing fine for months and then suddenly after my last print the effector is remaining triggered. I have checked the wiring on both sides and reset the machine to no avail. Looking for some answers.
-
Is the hotend fan running? Dust buildup can cause enough vibration to cause this.
On my big delta, I have to turn the hotend fan off while it probes.
-
Nope no fans running.
-
@TheBiologist said in Smart Effector remaining triggered:
I have been printing fine for months and then suddenly after my last print the effector is remaining triggered.
Do you mean that Duet Web Control shows it is triggered, or the green LED on the effector is continuously lit, or both?
-
The Light was remaining on and when asked to calibrate the interface reported it as triggered.
-
@TheBiologist said in Smart Effector remaining triggered:
The Light was remaining on and when asked to calibrate the interface reported it as triggered.
When you first power the machine on, does the green LED blink, and if so how many times?
