Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Replaced heatbrake and nozzle, now Z offset does not work.

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    3
    3
    111
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • wickedracerundefined
      wickedracer
      last edited by

      Cleaned my E3D V6 Hotend and replaced the nozzle, probably changing the overall length, but not by much and now when I go to use the Move Z on the PanelDue (to change the Z offset, closer to the bed), it doesn't change anything. what did I do that could've caused this? Any help would be great!

      1 Reply Last reply Reply Quote 0
      • aidarundefined
        aidar
        last edited by

        Probably your new nozzle is higher if you want to move it closer to bed. But you didnt probably change Z minimum, thats why it does not go lower.

        1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          If you're using a probe, you must redo this calibration.

          https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe#Section_Calibrate_the_Z_probe_trigger_height

          If you're using an endstop, you may need to change your homeall if you use G92 Z to set the z height.

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA