Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    U Axis Endstop

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    2
    650
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • mechw4rriorundefined
      mechw4rrior
      last edited by

      I am configuring an IDEX printer with a Duet Wifi. I have the U axis connected and moving, now I am working on homing.

      Currently I have the U axis endstop connected to the "E0 STOP" connector. Do I need to map this to the U axis somehow like I mapped the drives with the M584 command? If not, is it connected to the right spot?

      The X and Y endstops are connected to their corresponding connnectors. I don't have a Z endstop so there is nothing connected in that spot.

      Thanks!

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        The E0 endstop connector is the correct place to connect your U axis homing switch.

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA