M997 S0 does not update to 3.1.1?

Aitor

Hello there,
I have tried to upgrade several boards just out of the factory to version 3.1.1 by means of the M997 S0 command but I can't get it, not even from the web interface, to get to this version I have only managed to go through the 3.0 firmware first and then install the 3.1.1 version

I don't know if I'm doing something wrong?

I have to install several boards and what I have tried is to copy the SD of one already updated and tuned in another SD just out of the box, then by YAT I configure both the command M587 and M589 and my idea was to be able to update in this same step the new machines with the latest version 3.1.1

Sorry for my english

dc42

@Aitor said in M997 S0 does not update to 3.1.1?:

I have only managed to go through the 3.0 firmware first and then install the 3.1.1 version

See https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Upgrading_a_Duet_WiFi_Ethernet_Maestro_from_firmware_2_x_to_3_01_or_later.

Aitor

ok thanks

Finnls

See https://forum.duet3d.com/topic/17395/duet3-3beta12-error-duet3iap_sd_mb6hc-bin-not-found