Can't move motors when vin is not in range
-
Re: Attempt to move motors when VIN is not in range
Duet 2 WiFi 3.1 firmware
Ender 3 proTrying to to turn on my board and use it had it wired up and working for a few weeks now and I'm getting this error now can't connect to the board and also the blue is only coming on nothing else I've tested the power supply and it's 24v also tested the wires coming into the board and it's 24v as well
-
@sepones718 said in Can't move motors when vin is not in range:
the blue is only coming on nothing else
check your 7.5A fuse (brown one)