Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Problem with prints not running

    Scheduled Pinned Locked Moved
    Duet Web Control
    3
    5
    182
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • po3plestormundefined
      po3plestorm
      last edited by

      Ive been running into a problem on my network where Ill upload a gcode file using cura and using settings and intro gcode that was the same before I had this problem. After uploading a file to the card then running the code, the printer heats up, then homes. After it homes the printer just stops, nothing happens. The printer then says that its complete and just cools down again. Ive tried multiple files and checked the files for the code and its seems to be fine (I don't know too much gcode but its looks like there is plenty of moves and other commands many pages long that are just ignored by the printer).

      Has anyone else had this problem? Ive checked that my network is more than fast enough and I have redone my config multiple times and nothing seems to have fixed it.

      1 Reply Last reply Reply Quote 0
      • jens55undefined
        jens55
        last edited by

        I have had this happening when the printer isn't homed . I do not do a homing before every print and sometimes I forget after shutting down the printer for some reason or other.

        1 Reply Last reply Reply Quote 0
        • po3plestormundefined
          po3plestorm
          last edited by

          sorry I dont understand? is this what you did to fix it?

          1 Reply Last reply Reply Quote 0
          • jens55undefined
            jens55
            last edited by

            When your printer isn't homed, it will behave just as you describe.
            Check/verify the printer is homed!

            1 Reply Last reply Reply Quote 0
            • Phaedruxundefined
              Phaedrux Moderator
              last edited by

              Post your config.g and homall. You slicer start gcode. The results of M122 and the gcode file that won't print. Without that we're just guessing.

              Z-Bot CoreXY Build | Thingiverse Profile

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA