Remove "Triangle interpolation: point outside all triangles!"
-
Hello
is it posible to remove the "Triangle interpolation: point outside all triangles!" warnings ?
it spams my web ui
i do tool parking outside the bed and i get alot of warnings popups
https://www.youtube.com/watch?v=3UE9jU6RDP8 -
Which firmware version are you using? That message shouldn't occur if you are using firmware 1.18 unless you are trying to move the head well past the endstop without using the S1 modifier on the G1 command.
-
hello
im moving the head to a minus pos Y-60
this from the config
M208 X0 Y-70 Z0 S1 ; set axis minima (adjust to make X=0 and Y=0 the edges of the bed)Firmware Name: RepRapFirmware for Duet WiFi
Firmware Electronics: Duet WiFi 1.0
Firmware Version: 1.17e (2017-02-10)
WiFi Server Version: 1.03 (ch fork)
Web Interface Version: 1.14a -
As I said, it shouldn't occur with firmware 1.18.
-
ok thanks
