Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    2 Component Fans

    Scheduled Pinned Locked Moved
    Firmware installation
    6
    35
    1.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Phaedruxundefined
      Phaedrux Moderator
      last edited by

      Thanks.

      In the status page on the right side you can see the fan sliders. The "change visibility" button lets you choose to show each slider for fan0 and fan1 as well as the "tool fan" slider which is the combined fans defined in M563.

      Z-Bot CoreXY Build | Thingiverse Profile

      Heartleander81undefined 1 Reply Last reply Reply Quote 0
      • Heartleander81undefined
        Heartleander81 @Phaedrux
        last edited by

        @Phaedrux there is no tool fan option only "Bauteil1" and "Bauteil2"

        1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          You don't see the tool fan option when clicking on "change visibility"

          alt text

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • Heartleander81undefined
            Heartleander81
            last edited by

            fan.jpg

            there is not another option

            1 Reply Last reply Reply Quote 0
            • Phaedruxundefined
              Phaedrux Moderator
              last edited by

              You don't currently have a tool selected. Send T0 and look again.

              Try adding T0 to the end of your config.g so that your first tool is selected at start up.

              Z-Bot CoreXY Build | Thingiverse Profile

              Heartleander81undefined 1 Reply Last reply Reply Quote 0
              • Heartleander81undefined
                Heartleander81 @Phaedrux
                last edited by Heartleander81

                @Phaedrux ok now i have Tool Fan control. Many many thanks now it is work.

                I can start fan 1 und fan 2 with M106 S255

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  Send T0 as a command, or click on the name of your tool "Hotend" in the web interface.

                  That will select the tool and the tool fan defined for that tool will show up in the list of fan sliders.

                  Z-Bot CoreXY Build | Thingiverse Profile

                  Heartleander81undefined 1 Reply Last reply Reply Quote 0
                  • Heartleander81undefined
                    Heartleander81 @Phaedrux
                    last edited by

                    @Phaedrux it is work. Many many thanks.

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator
                      last edited by

                      You are welcome. Thanks for posting the photos of what you are seeing. It makes it a lot easier to understand what's going on.

                      Adding T0 to the end of config.g will ensure that a tool is always selected at startup. This would normally also be in the slicer start gcode. Without a tool selected, you can't print.

                      Z-Bot CoreXY Build | Thingiverse Profile

                      Heartleander81undefined 1 Reply Last reply Reply Quote 0
                      • Heartleander81undefined
                        Heartleander81 @Phaedrux
                        last edited by

                        @Phaedrux I have write T0 at custom settings are not defined and save the config.g.

                        I am so happy.

                        1 Reply Last reply Reply Quote 1
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA