deut3d 3 mainboard
-
Noobie Q. i`m using the deut3d mainboard with 4x nema 34 motors 686oz 2.6amp
will the board tmc5120 support them and what power supply should i be using
thanks any help appreciated -
are they bipolar? see
https://duet3d.dozuki.com/Wiki/Choosing_and_connecting_stepper_motors@dave-ward said in deut3d 3 mainboard:
will the board tmc5120
you mean tmc5160 ?
High Capacity Trinamic 5160 stepper drivers running at up to 4.45A RMS, 6.3A peak with firmware control of the full feature set including up to 256 microstepping, StallGuard 2 and StealthChop2@dave-ward said in deut3d 3 mainboard:
what power supply should i be using
calculate your need according to this
https://duet3d.dozuki.com/Wiki/Choosing_the_power_supply -
figuring that i would need 60v which the board doesn't support so is there a nema 34 that uses 32v which is the max of duet 3
-
@dave-ward said in deut3d 3 mainboard:
figuring that i would need 60v
why do you need that? back e.m.f?
-
asi said this is new to me motor kit came with 60v power supply so im assuming thats what they need
-
Can you link to your motors?
