New software bundle 3.2-beta4

[PCR]

Nice. Does anyone have a Screenshot of the prusa slicer thingi?

[chrishamm]

@PCR It isn't implemented in DWC yet but we'll add it to the job file list soon. Here an example what a thumbnail generated by PrusaSlicer looks like:

[Olby]

Updated using sbc without errors. But I suspect that the EXP3HC failed. Get lots of:
Error: M569: Response timeout: CAN addr 1, req type 6018, RID=1

and similar for all expansion board related commands.

[Olby]

Uploaded the new firmware to the system folder using the web ui. Now i get lots of:

Error: Firmware file Duet3Firmware_EXP3HC.bin not found

[dc42]

@Olby, is that file not present in /sys ?

[Olby]

@dc42 It is...
/opt/dsf/sd/sys/Duet3Firmware_EXP3HC.bin

-rwxrwxr-- 1 dsf  dsf  123K Nov 26 20:36 Duet3Firmware_EXP3HC.bin

[dc42]

@Olby said in New software bundle 3.2-beta4:

@dc42 It is...
/opt/dsf/sd/sys/Duet3Firmware_EXP3HC.bin

-rwxrwxr-- 1 dsf  dsf  123K Nov 26 20:36 Duet3Firmware_EXP3HC.bin

One for @chrishamm I think.

[Olby]

@dc42 Does it make sense to test with the sbc disconnected?

[dc42]

Yes you can try updating it in standalone mode, then reconnect the SBC once the expansion board is updated.

[chrishamm]

That's odd, I did test SBC file transfers and fixed a related issue in the firmware just before the release. I'll try to reproduce and fix it but I'm afraid I won't be able to look into it before Sunday.

[Olby]

@chrishamm Worked fine in stand alone mode

Duet EXP3HC firmware version 3.2-beta4 (2020-11-26)

So I have no excuse to by an Atmel-ICE.