I will Order some pcbs and can Order some for Europe with all SMT components! Please upvote the Post If you want one!

Would supply the Board without Blackpill and Display!

Great Work!!!!!!

PCB is Ready. Please Upvote this Post so i can see how many i will order!

Price should be about 4 € + Shipping

Then you only need

• ESP32 (https://arduino-projekte.info/wemos-lolin32/) This one got the Battery circuit onboard. I added a switch to the PCB if you want to turn off the RepPanel with the Battery
• The display.
  *2x20 Pin Male Connector ( Thinking about including it)

https://youtu.be/1rNEEOFOQ5k

Quick and Dirty Tutorial.

Dont know if its more hardware or software, but i like the concept of this:
https://www.klipper3d.org/Measuring_Resonances.html

Would be a nice addition to a toolboard or for the smart effector. See the link;)

Best

@Chriss

nice review i found

https://3dprintbeginner.com/trianglelab-matrix-extruder-review-hemera-alternative/

If more than 10 people want an adapter in Europe i would make some! Best

made a little videos how to install it. Mainly for my own reference later

How to install and test

How to make it as a systemservice

If somebody wants a PCB give me a PM. Have some spare!

Converted a Duet 2 WiFi to ESP07s. Easy!

https://github.com/ofligit/dsfprinter/tree/main/octoprint_dsfprinter

found this via a github search. Hope it is ok to post it here ? @ofliduet

https://www.youtube.com/watch?v=1rNEEOFOQ5k&t=5s

made a video some months ago @o_lampe

ArcWelder

TMC2209 the Drivers of the Mini 5

Tmc only Report high and very high i think. So it would be better to add a thermistor to one of the drivers

I have about 20pcbs and for 10 pieces parts

So for the price.

5 € the pcb
2,5€ for the sensors and eprom
1€ for 40 pin connector
1€ for resistors

due to a mistake at digikey the capacitors are to small.. So these have to be self sourced ( easy)

shipping with tracking 8€ without 4€ in europe
germany 3 € shipping

Contact me via PM

PCBs are here,

i can supply the pcb, the two sensors and the eprom.
due too some family buisness i do not know if i can solder them in the next weeks. So selling the parts only would be the best for me. Best

@Orang_ Please post the config.g and config-override.g

Normally there is no movement

In the gcode there only should be the G10 and No lenght. Have you ensbled Firmware retraction in the slicer?