Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet Wifi missing X-movement commands

    Scheduled Pinned Locked Moved
    General Discussion
    2
    3
    117
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • brasseundefined
      brasse
      last edited by

      Hey.

      Ive installed a Duet Wifi(2), on my Creality CR-5 Pro.
      However it seems that it misses X-movement commands randomly.

      Ive tried several different models and different slicers, all with the same result.
      The attached image is showing a hollow square of 100x100mm (and a skirt).

      What could be causing this?

      RepRapFirmware for Duet 2 WiFi/Ethernet 3.1.1 (2020-05-19b2)

      136340559_10159168313411639_8224735655466294606_o.jpg

      1 Reply Last reply Reply Quote 0
      • Vetiundefined
        Veti
        last edited by

        those are layer shifts.

        they can be causes by not enough current (around 75% of rated stepper current)

        friction in the axis.

        to high acceleration.

        1 Reply Last reply Reply Quote 0
        • brasseundefined
          brasse
          last edited by

          Increased current for the motors and that solved it! Thanks 🙂

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA