after Restart Filament Loaded into Tool0 forgotten.

NeueKlasse · 1 Jan 2021, 10:19

I have the Problem that after a Printer Restart Filament in Tool0 is forgotten,
(Dual Hotend, Tool1 Filament is still Present, Only Tool0 Filament is forgotten)
(DUET3 6MB HC)

Phaedrux · 1 Jan 2021, 18:15

Do you mean the filament function of DWC?

NeueKlasse · 3 Jan 2021, 17:14

Yes, it's about that Function

Phaedrux · 3 Jan 2021, 17:57

Firmware and DWC version?

NeueKlasse · 1 Apr 2021, 16:50

DWC 3.2beta4 (if i'm right)
RRF FW 3.2beta4.1
(Standalone Mode)

(was the same Problem as in 3.1.1 with the SBC attached and Communication errors...)

Phaedrux · 4 Jan 2021, 16:54

Thanks. Can you try with RC2?

NeueKlasse · 7 Jan 2021, 19:47

I'll update to RC2 and post the Outcome asap.

Phaedrux · 7 Jan 2021, 20:08

In the meantime since we spoke of RC2 the final release of 3.2 has happened, so please try that instead.

https://github.com/Duet3D/RepRapFirmware/releases/tag/3.2

NeueKlasse · 8 Jan 2021, 19:25

I've upgraded to 3.2. it seems that the Problem is gone now, Filaments are still
loaded in DWC during Cold Starts.