Problems with ethernet connection
-
I can't connect my Duet 2 Ethernet with my network anymore.
Firmware 3.2 is installed via USB and YAT is working.
Problem: non of the LED's (yellow & green) in the connector is on. The cable and the router settings haven't been changed....
Is there any chance that the fault is on my side and not a hardware issue ? How can I test this ?
Thanks for your help
Andreas -
Same issue here, I follow the post.
-
can you post your config.h, an out put from M122 and an output from M115
-
@alr said in Problems with ethernet connection:
Problem: non of the LED's (yellow & green) in the connector is on.
Are you meaning on the ethernet port?
When you're connected to YAT in addition to the M122 and M115 can you also send M552 and tell us the results?
