Duet 3 Mini 5+ Wiring Update

LevelFun

Any word on when the wiring guide will be updated?

Specifically this page

I just received my Duet 3 Mini 5+ Ethernet and I'm about to wire it up to a custom delta printer with the duet smart effector. Need a little help or if someone can point me in the direction of help configuring said printer.

Happy Printing!

Veti

what part are you missing?
the wiring diagram is at the top of the page

LevelFun

The empty headers that say TODO:

-Powering the Board
-5v Supply
-Connecting Stepper Motors
-Connecting Fans

Veti

@LevelFun said in Duet 3 Mini 5+ Wiring Update:

The empty headers that say TODO:
-Powering the Board

Connect 12v or 24v to the power in. observe the polarity

-5v Supply

do you want to use an external 5v? normally this is not required.

-Connecting Stepper Motors

normally you match the wire colours to the ones in the wiring diagram.
see https://duet3d.dozuki.com/Wiki/Choosing_and_connecting_stepper_motors

-Connecting Fans

what kind if fans do you have? 2 pin 3 pin or 4 pin? 12v or 24v?

LevelFun

Thanks for the quick reply.

Phaedrux

https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+3+Mini+5++Guide+Part+1:+Wiring/87?lang=en