G29 causes error
-
Hi all,
The above refers. When doing a X Y and Z homing, there is no issue; but as soon as I try and do a G29, I get 'Error: Z probe already triggered before probing move started'
My Z probe is a pin with a flag triggering an optical endstop - and a servo is used to 'extend' or 'retract' the pin for usage.
Any/all help appreciated!
Tinus -
run M401 before the G29
-
Thanks, working. Thought it would automatically deploy the probe upon start of G29?
-
you are right. and it does for me.
maybe you need a delay with G4 in your deploy if it takes a few ms
-
@Veti Thanx will try
-
Ok I solved it. I mistakenly declared my Z probe incorrectly. Changed it to P5 and now it work as expected....