Smart effector all ok ! not Working probe with touch bed
-
Hello, all forum
have smart effector duet new version, duet 2 wifi 1.04c, firmware rep rap 2.0.5.1.
Have this problem, smart effector working, fan, led green, etc.. only problem if touch bed not active probe, moving not stop with contact bed.
If i send comand g30 and touch nozzle, moving not stop, if touch up effector, led gren active and stop moving, not have idea for solution, have control cable problem not solve.
-
for this i not have start my first print and not have height map with mesh bed compesation
-
Have you been through this?
https://duet3d.dozuki.com/Wiki/Smart_effector_and_carriage_adapters_for_delta_printer -
yes have see link, not have solution
-
Post your config.g please.
-
have image for correct mount? i have test with fan down effector, and if touch nozzle, led gren start, possible not have mount correct? Have see guide smart effector e not have idea error