Connectors supplied?
-
The connector kit is separate
-
The connector kit is separate
Alright, thanks. Do you have information in where it is available?
-
I got a set with the last board I bought but it went into a printer that was already built so if you want it let me know. I really am not going to use it.
-
Both Duets I own came with a set of connectors for Motors, Power supply and Endstops. You need to solder them by yourself.
-
We supply the boards with connector kits. Including to filafarm.
-
We supply the boards with connector kits. Including to filafarm.
Not sure why i remembered buying them seperately… i had to go check filastruder after reading your comment
-
https://www.amazon.com/gp/product/B002AVVO7K/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Order one of those. Will make the connectors so much easier to put together. Be gentle with the crimper. Don't need to squeeze too hard.
-
https://www.amazon.com/gp/aw/d/B014V5LUPI?psc=1
these are half the cost and work for both micro connectors and Molex connectors
-
Good find.
-
This is what we normally advise https://www.amazon.com/HT-225D-Cycle-Ratchet-Crimping-interchangeable/dp/B007JLN93S/ref=sr_1_1. Also widely available on eBay. This https://www.amazon.com/dp/B071X8PG4B looks good to.
-
This is what we normally advise https://www.amazon.com/HT-225D-Cycle-Ratchet-Crimping-interchangeable/dp/B007JLN93S/ref=sr_1_1. Also widely available on eBay. This https://www.amazon.com/dp/B071X8PG4B looks good to.
Wish i had known about the interchangeable die set when i bought mine.
