3.3Beta1 reverse to 3.2.2

Krohm Koala

Hi, i have install the 3.3.1 but as i can't access files through the web page, i wanted to revert to 3.2.2 as it was working as intended but, i can't find how.
If i upload previous version, it didn't install it, i tried putting the files directly in firmware folder and update with M997 S0 but not working too..
Is there a way to revert to 3.2.2 ?

Phaedrux

Are you getting any error messages?

Try uploading the full zip file for 3.2.2

https://github.com/Duet3D/RepRapFirmware/releases/download/3.2.2/Duet2and3Firmware-3.2.2.zip

Krohm Koala

No error message, it's even telling that it's installing the update but nothing change.
I think M997 don't take the file in the firmware folder yet so i'm a bit stuck now
The web control don't upload to firmware folder yet i think as it's 3.2.2.
If it don't install the combined bin, I don't think the zip will make it, i'll still try.

Krohm Koala

@Phaedrux I was wrong, you were right, the Zip worked ! Thanks !

dc42

Did you read the 3.3beta1 upgrade notes?

Krohm Koala

@dc42 Yes I've read it, especially duet2 related, i wanted to try if the problem i have with filament-error routine is still here as it is in 3.2.2, but i'll wait finally wait until 3.3 have the matching DWC.

dc42

@Krohm-Koala said in 3.3Beta1 reverse to 3.2.2:

@dc42 Yes I've read it, especially duet2 related, i wanted to try if the problem i have with filament-error routine is still here as it is in 3.2.2, but i'll wait finally wait until 3.3 have the matching DWC.

The bit you may have missed is the bit telling you that you need to upload the new IAP file too.

Krohm Koala

@dc42 Oh yes, missed it my bad, it helps to give the access to the firmware folder through the DWC ?

dc42

@Krohm-Koala said in 3.3Beta1 reverse to 3.2.2:

@dc42 Oh yes, missed it my bad, it helps to give the access to the firmware folder through the DWC ?

DWC 3.x was already prepared for the change in location of the firmware files, but the IAP binaries were not.

Krohm Koala

@dc42 Okay thanks make sense