help for beginners

sergei

in which program should I flash the board? I have duo 2 internet

sergei

how can I register external drivers here?

sergei

sergei

Hello. Tell me how to correctly implement the Z probe after the probe passes the entire surface of the table during printing, the z axis should move. and she stands

Phaedrux

@sergei said in help for beginners:

Hello. Tell me how to correctly implement the Z probe after the probe passes the entire surface of the table during printing, the z axis should move. and she stands

I don't understand the question.
What is the probe? How is it configured? How are you trying to activate it?

sergei

tell me. is it possible to make SNS on the Duet 2 board

Phaedrux

@sergei What is SNS?

sergei

CNC milling machine

Phaedrux

Yes you can use CNC mode.

https://duet3d.dozuki.com/Wiki/Gcode#Section_M453_Select_CNC_Device_Mode

https://duet3d.dozuki.com/Wiki/Configuring_RepRapFirmware_for_a_CNC_machine

sergei

Can I get a ready-made firmware somewhere?

Phaedrux

It already is available in the firmware. You just need to send the gcode command to switch to CNC mode.

Maybe I don't understand what you actually mean here.

sergei

and what kind of command it is and where to register it. can you tell in more detail

Phaedrux

@sergei It is here

https://duet3d.dozuki.com/Wiki/Gcode#Section_M453_Select_CNC_Device_Mode

https://duet3d.dozuki.com/Wiki/Configuring_RepRapFirmware_for_a_CNC_machine

sergei

Hello . how can i make the interface in russian language control on the touch screen

Phaedrux

@sergei There would need to be a Russian translation first.

sergei

how can all this be implemented and what would work?

dc42

@sergei said in help for beginners:

how can all this be implemented and what would work?

Two steps needed:

Expand the font to include any characters that you need that are not already in the font, at the correct Unicode code points. The font is generated using GLCD Font Creator.
Add the Russian translations to the existing file Strings.hpp .

sergei

In which program to do this and where?

dc42

I just checked the source code, and Cyrillic characters are already supported as an option because a Ukrainian language translation was added recently. So the characters you need may already be present. In which case, all you needs to do is add the Russian translations to file Strings.hpp. You can find that file at https://github.com/Duet3D/PanelDueFirmware/blob/master/src/Strings.hpp.

sergei

I understand correctly . Editing inscriptions in Russian. Then what should be done?