Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Infinite loop?

    Scheduled Pinned Locked Moved
    Gcode meta commands
    3
    16
    538
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • K01571N3Nundefined
      K01571N3N
      last edited by

      Hi! I posted earlier about led controlling with loops. Now i got new firmware and variables are working but...

      I cant do a infinite loop because printers status is then busy all the time and i cant do anything because of "busy"...

      Does anyone have any idea how to do that?

      Heres some code

      ; Configuration file for Duet3
; Executed when Duet 3 is started


M80 ; Power supplies ON


; General parameters
G90			; Absolute coordinate
M83			; Relative extrusion
M550 P"Koistisen TC1"	; Printer's name
M669 K1			; Printer's kinematics = CoreXY


; Motor drivers
M569 P1.0 S1							; Motor 1.0 CW (X)
M569 P1.1 S1							; Motor 1.1 CW (Y)
M569 P0.3 S1							; Motor 1.2 CW (Z)
M569 P0.0 S1							; Motor 0.0 CW (C)
M569 P0.1 S0							; Motor 0.1 CCW (E0)
M569 P0.2 S0							; Motor 0.2 CCW (E1)
M569 P0.5 S0							; Motor 0.3 CCW (E2)
M584 X1.0 Y1.1 Z0.3 C0.0 E0.1:0.2:0.5	; Motor axis parameters
M350 X16 Y16 Z16 I1						; XYZ-Microstepping with integration
M350 E16:16:16 I1						; E-Microstepping with integration
M350 C8 I0							; C-Microstepping with integration


; Motor parameters
M92 X200.00 Y200.00 Z3200.00 C100 E829.00:829.00:829.00			; Step/mm
M566 X500.00 Y500.00 Z100.00 C300.00 E500.00:500.00:500.00		; Max allowable instantaneous speed change = Jerk (mm/min)
M203 X17000.00 Y17000.00 Z800.00 C5000.00 E9000.00:9000.00:9000.00	; Max speed (mm/min)
M201 X1500.00 Y1500.00 Z300.00 C500.00 E2000.00:2000.00:2000.00		; Acceleration (mm/s^2)
M906 X1100 Y1100 Z1600 C400 E1300:1300:1300 I30				; Motor current (mA) and motor idle factor in per cent
M84 S30			                				; Set idle timeout


; Axis limits
M208 X0:365 Y0:362 Z0:509 C-120:120	; Min/Max


; Endstops
M574 X1 S1 P"1.io0.in"		; X-Endstop = 1.io0.in
M574 Y1 S1 P"1.io1.in"		; Y-Endstop = 1.io1.in
M574 Z1 S2			; Z-Endstop = Z-Probe


; Z-Probe
M558 P8 C"0.io8.in" H1 F120 T15000	; Z-Probe = Microswitch. Measuring depth ja speed. Input = C"1.io2.in"
G31 P1000 X0 Y0 Z0			; Z-Probe triggervalue and offset
M557 X0:367 Y50:310 S30			; Bed calibration


; Heaters
; Bed
M308 S0 P"1.temp0" Y"thermistor" T100000 B4138 A"Peti"	; Heat sensor 0 = 1.temp0
M950 H0 C"0.out0" T0					; Heater 0 = 0.out0 = Heat sensor 0
M307 H0 B0 S1.00					; PID-control, max PWM-value
M140 H0							; Bed = Heater 0
M143 H0 S120						; Lämpöraja lämmitin 0 = 0-120C

; Tool 0
M308 S1 P"0.temp0" Y"thermistor" T100000 B4138 A"T0"	; Heat sensor 1 = 0.temp0
M950 H1 C"0.out1" T1					; Heater 1 = 0.out1 = Heat sensor 1
M307 H1 B0 S1.00					; PID-control, max PWM-value
M143 H1 S280						; Thermal limit for heater 1 = 0-280C

; Tool 1
M308 S2 P"0.temp1" Y"thermistor" T100000 B4138 A"T1"	; Heat sensor 2 = 0.temp1
M950 H2 C"0.out2" T2					; Heater 2 = 0.out2 = Heat sensor 2
M307 H2 B0 S1.00					; PID-control, max PWM-value
M143 H2 S280						; Thermal limit for heater 2 = 0-280C

; Tool 2
M308 S3 P"0.temp2" Y"thermistor" T100000 B4138 A"T2"	; Heat sensor 3 = 0.temp2
M950 H3 C"0.out3" T3					; Heater 3 = 0.out3 = Heat sensor 3
M307 H3 B0 S1.00					; PID-control, max PWM-value
M143 H3 S280						; Thermal limit for heater 3 = 0-280C


; Fans
; Tool 0
M950 F0 C"0.out7" Q500			; Fan 0 = 0.out7 = 500hz
M106 P0 C"T0/Kappale" S0.0 H-1		; Fan 0 name = "Kappale". Without temperature control
M950 F1 C"0.out4" Q500			; Fan 1 = 0.out4 = 500hz
M106 P1 C"T0/HotEnd" S1.0 H1 T50 L1.0	; Fan 1 name = "HotEnd". Temperature control = Heat sensor 1 = 50C

; Tool 1
M950 F2 C"0.out8" Q500			; Fan 2 = 0.out8 = 500hz
M106 P2 C"T1/Kappale" S0.0 H-1		; Fan 2 name = "Kappale". Without temperature control
M950 F3 C"0.out5" Q500 			; Fan 3 = 0.out5 = 500hz
M106 P3 C"T1/HotEnd" S1.0 H2 T50 L1.0	; Fan 3 name = "HotEnd". Temperature control = Heat sensor 2 = 50C

; Tool 2
M950 F4 C"0.out9" Q500			; Fan 4 = 0.out8 = 500hz
M106 P4 C"T2/Kappale" S0.0 H-1		; Fan 4 name = "Kappale". Without temperature control
M950 F5 C"0.out6" Q500 		        ; Fan 5 = 0.out5 = 500hz
M106 P5 C"T2/HotEnd" S1.0 H3 T50 L1.0	; Fan 5 name = "HotEnd". Temperature control = Heat sensor 2 = 50C


; Tools
; Tool 0 "BMG1"
M563 P0 S"BMG1" D0 H1 F0	; Tool 0 parameters
G10 P0 X0 Y0 Z0			; Tool 0 offset
G10 P0 R0 S0			; Tool 0 valmius- ja käyttölämpötilat 0C/0C
;M591 D0 P7 S1 L7 C"0.io0.in"	; Tool 0 Filament sensor

; Tool 1 "BMG2"
M563 P1 S"BMG2" D1 H2 F2	; Tool 1 parameters
G10 P1 X0 Y0 Z0			; Tool 1 offset
G10 P1 R0 S0			; Tool 1 valmius- ja käyttölämpötilat 0C/0C
;M591 D1 P7 S1 L7 C"0.io1.in"	; Tool 1 Filament sensor

; Tool 2 "BMG3"
M563 P2 S"BMG3" D2 H3 F4	; Tool 2 parameters
G10 P2 X0 Y0 Z0			; Tool 2 offset
G10 P2 R0 S0			; Tool 2 valmius- ja käyttölämpötilat 0C/0C
;M591 D2 P7 S1 L7 C"0.io2.in"	; Tool 2 Filament sensor

; Tool 3 "JYRSIN"
M563 P3 S"JYRSIN" F-1		; Tool 3 parameters
G10 P3 X0 Y0 Z0			; Tool 3 offset


; Macros
M98 P"0:/sys/VariableReset.g"	; Variable reset
;M98 P"0:/sys/LEDControl.g"     ; LED Control Loop start <--printer wont start because of the loop
M98 P"0:/sys/BedOrigin.g"	; Bed zeropoint G55
M98 P"0:/sys/ToolActive.g"	; Active tool reading

; Other
M911 S23 R23.8 P"M500 M913 X0 Y0 C0 M150 S60 G91 M83 G1 Z2 E-1 F1000"	; Voltage threshold
M501	; Load saved parameters from config-override.g


; Tool Offsets
G10 P0 X4.5 Y39 Z-46.		; Tool 0 offset
G10 P1 X4.5 Y39 Z-45.95		; Tool 1 offset
G10 P2 X4.5 Y39 Z-45.85		; Tool 2 offset
G10 P3 X0 Y0 Z0			; Tool 3 offset

      ; VariableReset.g
; Resets all variables
; 14.06.2021 16:16

; LED Variable reset
; Mode-----------------
global LEDMode = "OFF"
global LEDModeLast = "OFF"
var LEDModeMemory = "OFF"

; Color----------------------
global LEDAllColor = "White"
global LEDBedColor = "White"
global LEDFrameColor = "White"
global LEDToolHeadColor = "White"

; Dimming--------------
global LEDAllDim = 0
global LEDBedDim = 0
global LEDFrameDim = 0
global LEDToolHeadDim = 0

; All---------------
global AllRed = 0
global AllGreen = 0
global AllBlue = 0

global AllCustomRed = 0
global AllCustomGreen = 0
global AllCustomBlue = 0

; Bed---------------
global BedRed = 0
global BedGreen = 0
global BedBlue = 0

global BedCustomRed = 0
global BedCustomGreen = 0
global BedCustomBlue = 0

; Frame---------------
global FrameRed = 0
global FrameGreen = 0
global FrameBlue = 0

global FrameCustomRed = 0
global FrameCustomGreen = 0
global FrameCustomBlue = 0

; ToolHead---------------
global ToolHeadRed = 0
global ToolHeadGreen = 0
global ToolHeadBlue = 0

global ToolHeadCustomRed = 0
global ToolHeadCustomGreen = 0
global ToolHeadCustomBlue = 0

; Tool Variable reset
var CurrentToolMemory = -1

; Filament Variable reset
global FilamentName = 0
global FilamentTemperature = 0
global FilamentRetract = 0

      ; LED-Control
; LED Control loop
; 10.06.2021

; Signal colors
; Blue = Waiting
; Red = Error/emergency
; Yellow = Warning/operator
; Green = Running

; Global variables for mode:
; global.LEDMode = <Mode>
; global.LEDModeLast = <ModeLast>; This is used automatically
; <Mode>		(Explanation)
; WorkLight		(Bed static white, Frame static white, ToolHead static white)
; Homing		(Bed flashing yellow, Frame static white, ToolHead flashing yellow)
; Printing		(Bed static green, Frame static white, ToolHead static white)
; ToolChange	(Bed flashing green, Frame static white, ToolHead flashing yellow)
; FilamentWait	(Bed flashing blue, Frame static white, ToolHead static yellow)
; Wait			(Bed flashing blue, Frame static white, ToolHead static white)
; PrintFinished	(Bed flashing green slow low dim, Frame OFF, ToolHead OFF)
; OFF			(Bed OFF, Frame OFF, ToolHead OFF)
; Warning		(Bed flashing yellow, Frame static white, ToolHead static white)
; Error			(Bed flashing red, Frame static red, ToolHead static White)
; Custom		(Give your own parameters for color and dimming, will reset every time when Mode changed)

; Global variables for color:
; global.LEDAllColor = <Color>
; global.LEDBedColor = <Color>
; global.LEDFrameColor = <Color>
; global.LEDToolHeadColor = <Color>
; <Color>: Red, Green, Blue, White, Yellow, Custom

; Global variables for dimming
; global.LEDAllDim = <Dim>
; global.LEDBedDim = <Dim>
; global.LEDFrameDim = <Dim>
; global.LEDToolHeadDim = <Dim>
; <Dim>: 0-255

; Global variables for custom color:
; global.AllCustomRed = <ColorRGB>
; global.AllCustomGreen = <ColorRGB>
; global.AllCustomBlue = <ColorRGB>
; global.BedCustomRed = <ColorRGB>
; global.BedCustomGreen = <ColorRGB>
; global.BedCustomBlue = <ColorRGB>
; global.FrameCustomRed = <ColorRGB>
; global.FrameCustomGreen = <ColorRGB>
; global.FrameCustomBlue = <ColorRGB>
; global.ToolHeadCustomRed = <ColorRGB>
; global.ToolHeadCustomGreen = <ColorRGB>
; global.ToolHeadCustomBlue = <ColorRGB>
; <ColorRGB>: Value 0-255 for each color

; M150 U255 R255 S18 P255 F1			; LED Bed = Yellow
; M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
; M150 R255 U255 B255 S3 P255			; LED ToolHead = White

M150 X0 Q3000000

while 1=1								; Main control Loop

  set global.LEDMode = {global.LEDModeLast}

  ; Modes
  ; WorkLight (Bed static white, Frame static white, ToolHead static white)
  while global.LEDMode = "WorkLight"		; Enter loop
    M150 R255 U255 B255 S18 P255 F1		; LED Bed = White
    M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
    M150 R255 U255 B255 S3 P255			; LED ToolHead = White
    if global.LEDMode != "WorkLight"
      set global.LEDModeLast = "Worklight"
      break								; Exit loop



  ; Homing (Bed flashing yellow, Frame static white, ToolHead flashing yellow)
  while global.LEDMode = "Homing"			; Enter loop
    M150 R255 U255 S18 P255 F1			; LED Bed = Yellow
    M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
    M150 R255 U255 S3 P255				; LED ToolHead = Yellow
    G4 P1000							; 1000ms time delay
    M150 R255 U255 S18 P0 F1			; LED Bed = OFF
    M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
    M150 R255 U255 S3 P0				; LED ToolHead = OFF
    G4 P1000							; 1000ms time delay
    if global.LEDMode != "Homing"
      set global.LEDModeLast = "Homing"
      break								; Exit loop



  ; Printing (Bed static green, Frame static white, ToolHead static white)
  while global.LEDMode = "Printing"		; Enter loop
    M150 U255 S18 P255 F1				; LED Bed = Green
    M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
    M150 R255 U255 B255 S3 P255			; LED ToolHead = White
    if global.LEDMode != "Printing"
      set global.LEDModeLast = "Printing"
      break								; Exit loop



  ; ToolChange (Bed flashing green, Frame static white, ToolHead flashing yellow)
  while global.LEDMode = "ToolChange"	; Enter loop
    M150 U255 S18 P255 F1				; LED Bed = Green
    M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
    M150 R255 U255 S3 P255				; LED ToolHead = Yellow
    G4 P1000							; 1000ms time delay
    M150 U255 S18 P0 F1					; LED Bed = OFF
    M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
    M150 R255 U255 S3 P0				; LED ToolHead = OFF
    G4 P1000							; 1000ms time delay
    if global.LEDMode != "ToolChange"
      set global.LEDModeLast = "ToolChange"
      break								; Exit loop



  ; Wait (Bed flashing blue, Frame static white, ToolHead static white)
  while global.LEDMode = "Wait"			; Enter loop
    M150 B255 S18 P255 F1				; LED Bed = Blue
    M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
    M150 R255 U255 B255 S3 P255			; LED ToolHead = White
    G4 P1000							; 1000ms time delay
    M150 B255 S18 P0					; LED Bed = OFF
    G4 P1000							; 1000ms time delay
    if global.LEDMode != "Wait"
      set global.LEDModeLast = "Wait"
      break								; Exit loop



 ; PrintFinished (Bed flashing green slow low dim, Frame OFF, ToolHead OFF)
  while global.LEDMode = "PrintFinished"; Enter loop
    M150 U255 S18 P130 F1				; LED Bed = Green
    M150 R255 U255 B255 S29 P0 F1		; LED Frame = OFF
    M150 R255 U255 B255 S3 P0			; LED ToolHead = OFF
    G4 P2000							; 2000ms time delay
    M150 U255 S18 P0					; LED Bed = OFF
    G4 P2000							; 2000ms time delay
    if global.LEDMode != "PrintFinished"
      set global.LEDModeLast = "PrintFinished"
      break								; Exit loop



  ; OFF (Bed OFF, Frame OFF, ToolHead OFF)
  while global.LEDMode = "OFF"			; Enter loop
    M150 R255 U255 B255 S18 P0 F1		; LED Bed = OFF
    M150 R255 U255 B255 S29 P0 F1		; LED Frame = OFF
    M150 R255 U255 B255 S3 P0			; LED ToolHead = OFF
    if global.LEDMode != "OFF"
      set global.LEDModeLast = "OFF"
      break								; Exit loop



  ; Warning (Bed flashing yellow, Frame static white, ToolHead static white)
  while global.LEDMode = "Warning"		; Enter loop
    M150 R255 U255 S18 P255 F1			; LED Bed = Yellow
    M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
    M150 R255 U255 B255 S3 P255			; LED ToolHead = White
    G4 P1000							; 1000ms time delay
    M150 R255 U255 S18 P0				; LED Bed = OFF
    G4 P1000							; 1000ms time delay
    if global.LEDMode != "Warning"
      set global.LEDModeLast = "Warning"
      break								; Exit loop



  ; Error (Bed flashing red, Frame static red, ToolHead static White)
  while global.LEDMode = "Error"			; Enter loop
    M150 R255 S18 P255 F1				; LED Bed = Red
    M150 R255 S29 P255 F1				; LED Frame = Red
    M150 R255 U255 B255 S3 P255			; LED ToolHead = White
    G4 P1000							; 1000ms time delay
    M150 R255 S18 P0					; LED Bed = OFF
    G4 P1000							; 1000ms time delay
    if global.LEDMode != "Error"
      set global.LEDModeLast = "Error"
      break								; Exit loop



  ; Custom LEDs
  while global.LEDMode = "Custom"
    ; All colors--------------------
    if global.LEDAllColor = "Custom"
      set global.AllRed = {global.AllCustomRed}
      set global.AllGreen = {global.AllCustomGreen}
      set global.AllBlue = {global.AllCustomBlue}

    if global.LEDAllColor = "Red"
    set global.AllRed = 255
    set global.AllGreen = 0
    set global.AllBlue = 0

    if global.LEDAllColor = "Green"
      set global.AllRed = 0
      set global.AllGreen = 255
      set global.AllBlue = 0

    if global.LEDAllColor = "Blue"
      set global.AllRed = 0
      set global.AllGreen = 0
      set global.AllBlue = 255

    if global.LEDAllColor = "Yellow"
      set global.AllRed = 255
      set global.AllGreen = 255
      set global.AllBlue = 0

    if global.LEDAllColor = "White"
      set global.AllRed = 255
      set global.AllGreen = 255
      set global.AllBlue = 255

    ; Bed colors--------------------
    if global.LEDBedColor = "Custom"
      set global.BedRed = {global.BedCustomRed}
      set global.BedGreen = {global.BedCustomGreen}
      set global.BedBlue = {global.BedCustomBlue}

    if global.LEDBedColor = "Red"
      set global.BedRed = 255
      set global.BedGreen = 0
      set global.BedBlue = 0

    if global.LEDBedColor = "Green"
      set global.BedRed = 0
      set global.BedGreen = 255
      set global.BedBlue = 0

    if global.LEDBedColor = "Blue"
      set global.BedRed = 0
      set global.BedGreen = 0
      set global.BedBlue = 255

    if global.LEDBedColor = "Yellow"
      set global.BedRed = 255
      set global.BedGreen = 255
      set global.BedBlue = 0

    if global.LEDBedColor = "White"
      set global.BedRed = 255
      set global.BedGreen = 255
      set global.BedBlue = 255

    ; Frame colors--------------------
    if global.LEDFrameColor = "Custom"
      set global.FrameRed = {global.FrameCustomRed}
      set global.FrameGreen = {global.FrameCustomGreen}
      set global.FrameBlue = {global.FrameCustomBlue}

    if global.LEDFrameColor = "Red"
      set global.FrameRed = 255
      set global.FrameGreen = 0
      set global.FrameBlue = 0

    if global.LEDFrameColor = "Green"
      set global.FrameRed = 0
      set global.FrameGreen = 255
      set global.FrameBlue = 0

    if global.LEDFrameColor = "Blue"
      set global.FrameRed = 0
      set global.FrameGreen = 0
      set global.FrameBlue = 255

    if global.LEDFrameColor = "Yellow"
      set global.FrameRed = 255
      set global.FrameGreen = 255
      set global.FrameBlue = 0

    if global.LEDFrameColor = "White"
      set global.FrameRed = 255
      set global.FrameGreen = 255
      set global.FrameBlue = 255

    ; ToolHead colors--------------------
    if global.LEDToolHeadColor = "Custom"
      set global.ToolHeadRed = {global.ToolHeadCustomRed}
      set global.ToolHeadGreen = {global.ToolHeadCustomGreen}
      set global.ToolHeadBlue = {global.ToolHeadCustomBlue}

    if global.LEDToolHeadColor = "Red"
      set global.ToolHeadRed = 255
      set global.ToolHeadGreen = 0
      set global.ToolHeadBlue = 0

    if global.LEDToolHeadColor = "Green"
      set global.ToolHeadRed = 0
      set global.ToolHeadGreen = 255
      set global.ToolHeadBlue = 0

    if global.LEDToolHeadColor = "Blue"
      set global.ToolHeadRed = 0
      set global.ToolHeadGreen = 0
      set global.ToolHeadBlue = 255

    if global.LEDToolHeadColor = "Yellow"
      set global.ToolHeadRed = 255
      set global.ToolHeadGreen = 255
      set global.ToolHeadBlue = 0

    if global.LEDToolHeadColor = "White"
      set global.ToolHeadRed = 255
      set global.ToolHeadGreen = 255
      set global.ToolHeadBlue = 255

    M150 R{global.BedRed} U{global.BedGreen} B{global.BedBlue} P{global.LEDBedDim} S18 F1					; LED Bed
    M150 R{global.FrameRed} U{global.FrameGreen} B{global.FrameBlue} P{global.LEDFrameDim} S29 F1			; LED Frame
    M150 R{global.ToolHeadRed} U{global.ToolHeadGreen} B{global.ToolHeadBlue} P{global.LEDToolHeadDim} S3	; LED ToolHead
    if global.LEDMode != "Custom"
      set global.LEDModeLast = "Custom"
      break
      dc42undefined 1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators @K01571N3N
        last edited by

        @k01571n3n where did you put the LED code: in daemon.g or somewhere else?

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        K01571N3Nundefined 1 Reply Last reply Reply Quote 0
        • K01571N3Nundefined
          K01571N3N @dc42
          last edited by

          @dc42 what you mean by led code? do you mean that led control loop? and what is daemon.g?

          dc42undefined 1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators @K01571N3N
            last edited by

            @k01571n3n said in Infinite loop?:

            @dc42 what you mean by led code? do you mean that led control loop? and what is daemon.g?

            I mean the third file that you listed in your original post in this thread.

            daemon.g is a file that you can have in your /sys folder on the SD card to execute background tasks.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            K01571N3Nundefined 1 Reply Last reply Reply Quote 0
            • K01571N3Nundefined
              K01571N3N @dc42
              last edited by

              @dc42 Hi, yesterday I couldn't answer because this site said i was spamming... 😄

              tried that daemon file but it didnt work

              it was something like that

              set global.LEDMode = {global.LEDModeLast}

; WorkLight (Bed static white, Frame static white, ToolHead static white)
while global.LEDMode = "WorkLight"		; Enter loop
  M150 R255 U255 B255 S18 P255 F1		; LED Bed = White
  M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
  M150 R255 U255 B255 S3 P255			; LED ToolHead = White
  if global.LEDMode != "WorkLight"
    set global.LEDModeLast = "Worklight"
    break								; Exit loop
 
 
 
  ; Homing (Bed flashing yellow, Frame static white, ToolHead flashing yellow)
while global.LEDMode = "Homing"			; Enter loop
  M150 R255 U255 S18 P255 F1			; LED Bed = Yellow
  M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
  M150 R255 U255 S3 P255				; LED ToolHead = Yellow
  G4 P1000							; 1000ms time delay
  M150 R255 U255 S18 P0 F1			; LED Bed = OFF
  M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
  M150 R255 U255 S3 P0				; LED ToolHead = OFF
  G4 P1000							; 1000ms time delay
  if global.LEDMode != "Homing"
    set global.LEDModeLast = "Homing"
    break								; Exit loop
 
 
 
; Printing (Bed static green, Frame static white, ToolHead static white)
while global.LEDMode = "Printing"		; Enter loop
  M150 U255 S18 P255 F1				; LED Bed = Green
  M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
  M150 R255 U255 B255 S3 P255			; LED ToolHead = White
  if global.LEDMode != "Printing"
    set global.LEDModeLast = "Printing"
    break

              i also tried to change while to if

              set global.LEDMode = {global.LEDModeLast}

; WorkLight (Bed static white, Frame static white, ToolHead static white)
if global.LEDMode = "WorkLight"		; Enter loop
  M150 R255 U255 B255 S18 P255 F1		; LED Bed = White
  M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
  M150 R255 U255 B255 S3 P255			; LED ToolHead = White
  set global.LEDModeLast = "Worklight"
 
 
 
  ; Homing (Bed flashing yellow, Frame static white, ToolHead flashing yellow)
if global.LEDMode = "Homing"			; Enter loop
  M150 R255 U255 S18 P255 F1			; LED Bed = Yellow
  M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
  M150 R255 U255 S3 P255				; LED ToolHead = Yellow
  G4 P1000							; 1000ms time delay
  M150 R255 U255 S18 P0 F1			; LED Bed = OFF
  M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
  M150 R255 U255 S3 P0				; LED ToolHead = OFF
  G4 P1000							; 1000ms time delay
  set global.LEDModeLast = "Homing"
 
 
 
; Printing (Bed static green, Frame static white, ToolHead static white)
if global.LEDMode = "Printing"		; Enter loop
  M150 U255 S18 P255 F1				; LED Bed = Green
  M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
  M150 R255 U255 B255 S3 P255			; LED ToolHead = White
  set global.LEDModeLast = "Printing"

              i also tested that the daemon.g is executed by adding m291 there and it works. but the led control dont work

              jay_s_ukundefined 1 Reply Last reply Reply Quote 1
              • jay_s_ukundefined
                jay_s_uk @K01571N3N
                last edited by

                @k01571n3n how are you setting LEDMode to begin with? and how are you switching between the different modes?

                Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                K01571N3Nundefined 1 Reply Last reply Reply Quote 0
                • K01571N3Nundefined
                  K01571N3N @jay_s_uk
                  last edited by

                  @jay_s_uk in config.g is M98 P"VariableReset.g" and all variables are resetted to something i want in that VariableReset.g. LEDMode is "OFF" and for example, in tool change macro have set global.LEDMod = "ToolChange", when printing LEDMode = "Printing" etc

                  jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                  • jay_s_ukundefined
                    jay_s_uk @K01571N3N
                    last edited by

                    @k01571n3n can I suggest something like this?

                    ; WorkLight (Bed static white, Frame static white, ToolHead static white)
if {global.LEDMode == "WorkLight" && global.LEDModeLast != "WorkLight"}	; Enter loop
   M150 R255 U255 B255 S18 P255 F1		; LED Bed = White
   M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
   M150 R255 U255 B255 S3 P255			; LED ToolHead = White
   set global.LEDModeLast = "Worklight"
 
 
 
  ; Homing (Bed flashing yellow, Frame static white, ToolHead flashing yellow)
if {global.LEDMode == "Homing" && global.LEDModeLast != "Homing"}			; Enter loop
  M150 R255 U255 S18 P255 F1			; LED Bed = Yellow
  M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
  M150 R255 U255 S3 P255				; LED ToolHead = Yellow
  G4 P1000							; 1000ms time delay
  M150 R255 U255 S18 P0 F1			; LED Bed = OFF
  M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
  M150 R255 U255 S3 P0				; LED ToolHead = OFF
  G4 P1000							; 1000ms time delay
  set global.LEDModeLast = "Homing"
  
; Printing (Bed static green, Frame static white, ToolHead static white)
if {global.LEDMode == "Printing" && global.LEDModeLast != "Printing"}		; Enter loop
  M150 U255 S18 P255 F1				; LED Bed = Green
  M150 R255 U255 B255 S29 P255 F1		; LED Frame = White
  M150 R255 U255 B255 S3 P255			; LED ToolHead = White
  set global.LEDModeLast = "Printing"

                    I know it won't loop the homing routine (can work on that next) but theres no point running the other two over and over. Let me know if it works

                    Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                    K01571N3Nundefined 1 Reply Last reply Reply Quote 1
                    • K01571N3Nundefined
                      K01571N3N @jay_s_uk
                      last edited by

                      @jay_s_uk the reason for global.LEDModeLast is:

                      Printer is printing -> LEDMode = "Printing"
                      Toolchange comes

                      Toolchange macro
set global.LEDMode = "ToolChange"

tool change stuff

set global.LEDMode = {global.LEDModeLast}

                      When LEDMode is changed to something from "Printing", it sets LEDModeLast = "Printing"

                      if global.LEDMode = "Printing"		; Enter loop
  M150 U255 S18 P255 F1			; LED Bed = Green
  M150 R255 U255 B255 S29 P255 F1	; LED Frame = White
  M150 R255 U255 B255 S3 P255		; LED ToolHead = White
  set global.LEDModeLast = "Printing"   <------ here

                      So when the toolchange is completed, LEDMode is back at "Printing" or whatever was the last state of LED, you got the point?

                      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                      • jay_s_ukundefined
                        jay_s_uk @K01571N3N
                        last edited by

                        @k01571n3n yea, but at the end of your tpost, you can just change it back to printing.

                        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                        K01571N3Nundefined 1 Reply Last reply Reply Quote 0
                        • K01571N3Nundefined
                          K01571N3N @jay_s_uk
                          last edited by

                          @jay_s_uk yes i can but.. if im not printing, it will change it to wrong mode, thats why there is that last state in memory

                          jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                          • jay_s_ukundefined
                            jay_s_uk @K01571N3N
                            last edited by

                            @k01571n3n rather than using a variable, why not just check the printer state? that has different cases like idle, printing, toolchanging etc

                            Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                            K01571N3Nundefined 1 Reply Last reply Reply Quote 0
                            • K01571N3Nundefined
                              K01571N3N @jay_s_uk
                              last edited by

                              @jay_s_uk but why wouldn’t you want to use variables? i dont get your point for that

                              K01571N3Nundefined 1 Reply Last reply Reply Quote 0
                              • K01571N3Nundefined
                                K01571N3N @K01571N3N
                                last edited by

                                @k01571n3n it is so easy to customise almost everything with variables

                                jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                                • jay_s_ukundefined
                                  jay_s_uk @K01571N3N
                                  last edited by

                                  @k01571n3n look, it was a suggestion. i also said code that i thought would work compared to your code that doesn't. i'm sorry i couldn't help you

                                  Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                                  K01571N3Nundefined 1 Reply Last reply Reply Quote 0
                                  • K01571N3Nundefined
                                    K01571N3N @jay_s_uk
                                    last edited by

                                    @jay_s_uk i understand but that's why i told you why ModeLast exists. and checking printer state is one option too

                                    1 Reply Last reply Reply Quote 0
                                    • First post
                                      Last post
                                    Unless otherwise noted, all forum content is licensed under CC-BY-SA