Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    How long dos it take to update to RRF 3.3 form 3.0?

    Scheduled Pinned Locked Moved
    Firmware installation
    4
    5
    368
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • tkdirpundefined
      tkdirp
      last edited by

      Because it is updating for about 45 minutes.

      I want to make sure if it actually updating, an error, or if I am not supposed to do directly to 3.3 from 3.0

      Screen Shot 2021-06-18 at 5.25.39 PM.png

      jay_s_ukundefined fcwiltundefined vwegertundefined 3 Replies Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @tkdirp
        last edited by

        @tkdirp not that long. just reboot and see where you're at

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        1 Reply Last reply Reply Quote 0
        • fcwiltundefined
          fcwilt @tkdirp
          last edited by

          @tkdirp

          I've never had an update take more than a few moments, certainly not 45 minutes.

          I suspect that something had gone wrong. Re-boot the machine and see if the update was successful.

          Frederick

          Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

          tkdirpundefined 1 Reply Last reply Reply Quote 0
          • vwegertundefined
            vwegert @tkdirp
            last edited by

            @tkdirp You might have run into the same issue I encountered this morning: https://forum.duet3d.com/topic/23779/update-to-3-3-killed-wifi-file-re-location-issue

            1 Reply Last reply Reply Quote 0
            • tkdirpundefined
              tkdirp @fcwilt
              last edited by

              @fcwilt
              Screen Shot 2021-06-18 at 5.46.31 PM.png Screen Shot 2021-06-18 at 5.46.23 PM.png
              it is up and running 🙂

              1 Reply Last reply Reply Quote 1
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA