Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet2 wifi do not connect with USB

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    2
    86
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Jackundefined
      Jack
      last edited by

      Hello,

      I can't reach Duet2 wifi harware even with USB. Wifi is not responding so I tried with USB.
      But USB port is not available on PC. YAT or SerialTools do not recognize Duet.

      I tried to erase firmware to re-install. But nothing is responding when erase with jumper.

      3.3v LED is not running only 5v is lighting.
      IMG_5213.jpg

      Could you help?

      Best regards
      Eric

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Do the LEDs that light up change when you apply VIN power?

        Can you provide a higher resolution photo of the board in case we can see a failed component?

        Otherwise, please try working through this page https://duet3d.dozuki.com/Wiki/What_to_do_if_your_Duet_won't_respond

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA