Set Mesh Parameters

Btj

Hm! You can excuse all my questions!
has now made the card work except Set Mesh Parameters..no matter what I do I do not get to Mesh Parameters
It only measures part of the bed

fcwilt

@btj said in Set Mesh Parameters:

Hm! You can excuse all my questions!
has now made the card work except Set Mesh Parameters..no matter what I do I do not get to Mesh Parameters
It only measures part of the bed

You should get in the habit of giving us a lot more information than that.

At a minimum include the relevant commands and their parameters.

Better still post, using the </> tag, all the relevant files, like config.g, mesh.g, etc.

Frederick

Phaedrux

@btj said in Set Mesh Parameters:

It only measures part of the bed

Keep in mind that it can only measure the parts of the bed that the probe itself can actually reach.