does config-override change needs rebooting board?

[markduet]

I make changes to my config-override.g sometimes to make adjustments, and then I reboot the board by hitting Emergency Stop after that, to load the new settings. Do I need to Reboot the board or can I just load the config-override.g by "Run"ing it, or is there a better/quicker way with less steps?

Thanks

[Phaedrux]

https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M501_Read_stored_parameters

[markduet]

@phaedrux Thanks a bunch for the quick reply! That totally solves my problem.