Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Sent Gcode commands not going away in DWC console

    Scheduled Pinned Locked Moved
    Duet Web Control
    3
    12
    492
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • code7undefined
      code7
      last edited by

      Is there a setting or something that I can do differently when sending a gcode command through the DWC console to have it disappear after pressing <Enter>?

      Delta Printer Using a Duet 2 Wifi v1.04c, FW3.4.0beta2, Duet WiFi sever 1.26, Duet Web Control 3.3.0

      fcwiltundefined code7undefined 2 Replies Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt @code7
        last edited by

        @code7

        Why do you wish that?

        I find it very useful to be able to execute the same command many times just by hitting the Enter key.

        Frederick

        Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

        code7undefined 1 Reply Last reply Reply Quote 0
        • code7undefined
          code7 @fcwilt
          last edited by

          @fcwilt
          I seldom send the same gcode command twice in a row. It would be cool if you could use the up arrow (like in DOS and other programs) to populate the previous command if you want to run it again.

          Delta Printer Using a Duet 2 Wifi v1.04c, FW3.4.0beta2, Duet WiFi sever 1.26, Duet Web Control 3.3.0

          fcwiltundefined 1 Reply Last reply Reply Quote 1
          • fcwiltundefined
            fcwilt @code7
            last edited by

            @code7 said in Sent Gcode commands not going away in DWC console:

            @fcwilt
            I seldom send the same gcode command twice in a row. It would be cool if you could use the up arrow (like in DOS and other programs) to populate the previous command if you want to run it again.

            Well the up/dn cursor keys being up the list of previous commands and you can select the one to execute.

            Frederick

            Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

            code7undefined 1 Reply Last reply Reply Quote 0
            • code7undefined
              code7 @fcwilt
              last edited by

              @fcwilt said in Sent Gcode commands not going away in DWC console:

              Well the up/dn cursor keys being up the list of previous commands and you can select the one to execute.

              It's usually quicker for me to just retype the command than having to scroll through a list when I'm looking at the printer.

              Delta Printer Using a Duet 2 Wifi v1.04c, FW3.4.0beta2, Duet WiFi sever 1.26, Duet Web Control 3.3.0

              fcwiltundefined 1 Reply Last reply Reply Quote 0
              • fcwiltundefined
                fcwilt @code7
                last edited by

                @code7 said in Sent Gcode commands not going away in DWC console:

                @fcwilt said in Sent Gcode commands not going away in DWC console:

                Well the up/dn cursor keys being up the list of previous commands and you can select the one to execute.

                It's usually quicker for me to just retype the command than having to scroll through a list when I'm looking at the printer.

                True but as you type it jumps to the next match in the list.

                Frederick

                Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                1 Reply Last reply Reply Quote 0
                • code7undefined
                  code7 @code7
                  last edited by

                  @fcwilt
                  @Phaedrux

                  I use the DWC console to send a lot of different commands. Is there anyone else that thinks this suggested update above would be helpful so we don't need to delete every command we send prior to sending a new command?

                  Delta Printer Using a Duet 2 Wifi v1.04c, FW3.4.0beta2, Duet WiFi sever 1.26, Duet Web Control 3.3.0

                  fcwiltundefined 1 Reply Last reply Reply Quote 1
                  • fcwiltundefined
                    fcwilt @code7
                    last edited by

                    @code7 said in Sent Gcode commands not going away in DWC console:

                    @fcwilt
                    @Phaedrux

                    I use the DWC console to send a lot of different commands. Is there anyone else that thinks this suggested update above would be helpful so we don't need to delete every command we send prior to sending a new command?

                    There is no need to delete old commands. Why do you think that is the case?

                    Frederick

                    Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator
                      last edited by

                      I wouldn't mind if it had an option to behave more like a command line terminal where after you press enter the command is sent and disappears and then you can press up arrow to cycle through previous command history. That's just my muscle memory. I do find it annoying to have to constantly delete the previous command to type something new.

                      Z-Bot CoreXY Build | Thingiverse Profile

                      fcwiltundefined 1 Reply Last reply Reply Quote 1
                      • fcwiltundefined
                        fcwilt @Phaedrux
                        last edited by fcwilt

                        @phaedrux said in Sent Gcode commands not going away in DWC console:

                        I do find it annoying to have to constantly delete the previous command to type something new.

                        I am seeing something different in firmware 3.3.

                        When I click on the command line of the DWC Console any existing command is selected and any new command typed in replaces what was there.

                        Frederick

                        Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                        1 Reply Last reply Reply Quote 0
                        • code7undefined
                          code7
                          last edited by code7

                          @Phaedrux
                          @fcwilt said in Sent Gcode commands not going away in DWC console:

                          I am seeing something different in firmware 3.3.
                          When in click on the command line of the DWC Console any existing command is selected and any new command typed in replaces what was there.

                          This only happens the first time you click into the command console. If you send a second command in the console it does not behave this way. I vote with Phaedrux.

                          "I wouldn't mind if it had an option to behave more like a command line terminal where after you press enter the command is sent and disappears and then you can press up arrow to cycle through previous command history. That's just my muscle memory. I do find it annoying to have to constantly delete the previous command to type something new."

                          Delta Printer Using a Duet 2 Wifi v1.04c, FW3.4.0beta2, Duet WiFi sever 1.26, Duet Web Control 3.3.0

                          fcwiltundefined 1 Reply Last reply Reply Quote 1
                          • fcwiltundefined
                            fcwilt @code7
                            last edited by fcwilt

                            @code7

                            Interesting you should mention "muscle memory".

                            When you pointed out the behavior that was different from mine I paid more attention to what I was doing.

                            Tab then Shift-Tab

                            It had become so automatic I was no longer aware I was doing it.

                            The mind is a interesting thing.

                            Frederick

                            Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Unless otherwise noted, all forum content is licensed under CC-BY-SA