• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

How to reflash internal firmware

Scheduled Pinned Locked Moved
Using Duet Controllers
2
4
207
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    maroonds
    last edited by 2 Sept 2021, 20:01

    Hi where can I find the internal firmware of my duet maestro to download?

    1 Reply Last reply Reply Quote 0
    • undefined
      Phaedrux Moderator
      last edited by 2 Sept 2021, 20:10

      https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware

      If that doesn't help, can you be more specific?

      Z-Bot CoreXY Build | Thingiverse Profile

      undefined 1 Reply Last reply 2 Sept 2021, 20:12 Reply Quote 0
      • undefined
        maroonds @Phaedrux
        last edited by 2 Sept 2021, 20:12

        @phaedrux It says that I need the firmware binary file for bossa but where do I get it?

        1 Reply Last reply Reply Quote 0
        • undefined
          Phaedrux Moderator
          last edited by Phaedrux 9 Feb 2021, 20:21 2 Sept 2021, 20:18

          Apparently you didn't read the NOTES BEFORE YOU START section.

          Check that you have downloaded the correct firmware before installing it. See section below regarding which files are needed for each board.

          You'd want this one by the way

          https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/DuetMaestroFirmware.bin

          And you'll also want to update the DWC files in the /www folder on the SD card since you're doing this manually.

          https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/DuetWebControl-SD.zip

          Extract that zip file into the /www folder replacing the contents that are already there.

          Once you have updated and connected to DWC, you should verify that the firmware and DWC were updated.

          Then to ensure you have all the correct files in place you should upload this zip file to the system tab. This would be the normal way to update when you still have a network connection to DWC active.

          https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/Duet2and3Firmware-3.3.zip

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          4 out of 4
          • First post
            4/4
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA