PEI sheet paint curing
-
Mounting and configuring the IR sensor on a HyperCube Evolution/Titan Aero/Duet Wifi has gone really well. Unfortunately I won't be getting "star baker" this week for my attempt at curing paint on a PEI sheet (the 3M sheet in the first picture isn't attached)
This was 2 hours @ 170°C in a fan oven.
-
Here's a bit more info… the end that shrank the most was closest to the fan I think
-
That sucks.
-
Just to follow up, I ordered some sheets of Buildtak which seems to be working well as far as IR probing goes.