cube

[A Former User]

Hello someone can tell me why my cube is half in normal cube?!

[cosmowave]

@sgk eventually your steps/mm are wrong?
or you have a scale factor in the slicer?

[A Former User]

@cosmowave here M92 X200,120 Y200,541 Z400 E686.5 ; Set steps per mm for Bondtech

[cosmowave]

@sgk steps/mm are machine specific. So i can not say if there is a fault!
When you move z in dwc e.g. 10mm, does the machine move 10mm?

[cosmowave]

@sgk said in cube:

here M92 X200,120 Y200,541 Z400 E686.5 ; Set steps per mm for Bondtech

For what are the ",120" and ",541"? I'm not sure if a colon works in the configuration... you eventually should use a dot "."

[A Former User]

@cosmowave I replaced the 8t z rods with 1204

M92 X200,120 Y200,541 Z400 E686.5
M92 X200,120 Y200,541 Z800 E686.5

[cosmowave]

@sgk i can't follow you....
It is working now?

[A Former User]

@cosmowave yes thank you