No wifi connection after upgrades
-
I followed the documentation - Upgrading to DuetWIFIFirmware 1.19 and even installed YAT and redid the macro entries.
These are the entries:-M552 S0
ok<lf>Wifi module is idle <lf>G4 P1000
ok <lf>M587 S" myssid " P" my password "
ok <lf>M587
Remembered networks:<lf>your-network-ssid <lf>myssid<lf>ok <lf>M552 S1
ok<lf>Wifi module is connected to access point myssid, IP address xxx.xxx.x.xx <lf>I then try to connect using chrome and the web control starts and asks for the password.
I entered the wireless network password and the screen returns invalid password
I try and connect again and I get the error :-
Could not establish a connection to the Duet firmware! Please check your settings and try again.I seem to be going round in circles, after trying this update a number of times, I just can't see what I am doing wrong.
I get confirmation that wifi is connected when using YAT and printer interface but not the web control.
Please help
Paul</lf></lf></lf></lf></lf></lf></lf></lf></lf></lf> -
Do you have an entry
M551 Ppasswordin config.g where 'password' is anything other than 'reprap'?
That will be the password the webUI is asking. -
Thanks for that,
I have solved the problem by installing 1.9 and ensuring that it runs and then updated to 1.92.The problem was probably mine, trying to update a few steps at a time.
