Upgraded to RRF 3.x and DWC is barraging notifications
-
See video - Continually shows printing notification or heating notification while heating or printing.
-
https://forum.duet3d.com/topic/20346/m117-is-spamming-the-web-interface/2?_=1637624356421
This topic indicated I just needed to also update Duet Web Control. Probably could use a little clarity in the upgrade doc for that.
Works great now
For anyone that finds this later, I just uploaded "DuetWebControl-SD.zip" from the release of the firmware that I had already installed, and it updated DWC.
-
The best way to upgrade is to use the complete zip files which contain everything needed rather than piecemeal.
If you still have access to DWC. Upload these 3 zip files, one at a time in the system tab. Don't extract them first. Reboot after each. Use M115 in the gcode console to verify the firmware has been applied.
https://github.com/Duet3D/RepRapFirmware/releases/download/2.05.1/Duet2Firmware-2.05.1.zip
https://github.com/Duet3D/RepRapFirmware/releases/download/3.0/Duet2and3Firmware-3.0.zip
https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/Duet2and3Firmware-3.3.zip
That will get your firmware and DWC up to date.
