Reallocating i/o pin to input
-
Hello,
I have a Duet 3 mini5+ and I run out of input i/o:
I have used all the
io0.in
io1.in
io2.in
io3.in
io4.in
io5.in
io6.inI need one more input i/o for the filament monitor.
I am thinking either to recycle io3.out or or one of the spi.csX as an input.Can I do this? How?
Thank you for your input -
Take a look at this thread and see if that gets you further
https://forum.duet3d.com/topic/23616/duet3-mbhc-gpio-input-on-output-and-vice-versa?_=1628618680329 -
Great! thank you for the link to that post!
Found the solution and reallocated my Y endstop:
M574 Y1 S1 P"^io2.out"