Host Action Commands
-
Could this be implemented into the duet's firmware? I would like to use the spaghetti detective on octoprint but still maintain the features of the duet that would other wise be disabled like my filament sensor. If they could play nice together I would love for octoprint plugins to be that much more compatible with duet and its feature set. I'm making a similar post on the octoprint feature request as well. I'm not sure which side needs to help make changes if not both.
https://www.youtube.com/watch?v=YDvFN51siMU
https://community.octoprint.org/t/host-action-commands-for-duet/40963 -
It seems like this is being implemented but when connected through usb the filament sensor is ignored and not reported as "action:pause" or "action:filment_out" or some other comunication that I can flag to setup the correct gcode.
-
Where it says about a pg down
https://duet3d.dozuki.com/Wiki/Gcode#Section_Replies_from_the_RepRap_machine_to_the_host_computer"On the latest version of Pronterface and Octoprint (1.2.0+) a special comment of the form:
// action:command
is allowed to be sent from the firmware, the command can currently be pause, resume or disconnect which will execute those commands on the host."Is this referring to a release candidate or beta version?
I'm on the latest stable version and either I don't know how to trigger one or it is not in this version.
