[3.4rc1] DWC - Object Height incorrect

oozeBot

Just noticed that the Object Height displayed in the list is incorrect. This may be related to the other issue we reported (linked below).

Here is the list display:

And here is the gCode where it, for sure, is 34mm tall.

chrishamm

@oozebot Thanks for your report. Depending on your slicer it's better to use something like

;NUM_LAYERS: [total_layer_count]

somewhere at the start or end of your G-code file, that will give you an accurate number of layers.

I'll check why the total object height is off.